Food Chemistry
-15%
portes grátis
Food Chemistry
The Role of Additives, Preservatives and Adulteration
Sen, Mousumi
John Wiley & Sons Inc
01/2022
496
Dura
Inglês
9781119791614
15 a 20 dias
832
Descrição não disponível.
Preface xix
1 Food Chemistry: Role of Additives, Preservatives, and Adulteration 1
Mousumi Sen
1.1 Introduction 2
1.2 Categories of Food Colors 2
1.3 Natural Colors Are Best Over Artificial Colors 3
1.4 Classification of Food Colorants 3
1.4.1 Natural Colorants 3
1.4.2 Synthetic Colorants 7
1.4.2.1 Water Soluble Synthetic Colors 7
1.4.2.2 Fat Soluble Synthetic Colorants 8
1.4.2.3 Lake Colorants 8
1.5 Classification of Food Additives 9
1.5.1 Why Food Colors Are Preferred 12
1.5.2 E-Numbering 13
1.6 Food Spoilage and Preservation 14
1.6.1 Causes of Spoilage 14
1.6.2 Principle of Food Preservation 15
1.7 Preservatives 15
1.7.1 Factors Affecting Preservative Efficiency 15
1.7.1.1 Interaction With Formulation Components 15
1.7.1.2 Properties of Preservatives 16
1.7.1.3 Effect of Containers 16
1.7.1.4 Types of Micro-Organisms 16
1.7.1.5 Influence of pH 16
1.7.2 Factors Affecting Chemical Preservation 17
1.7.3 Classification of Chemical Preservatives 17
1.7.4 Types of Chemical Preservatives 17
1.7.5 Natural Chemical Preservatives 18
1.7.6 Methods of Food Preservation 19
1.8 Antioxidants 20
1.9 Oils and Spices 21
1.10 Introduction to Hurdle Technology 22
1 Advantages of Food Additives and Preservatives 23
2 Disadvantages of Food Additives and Preservatives 23
3 Effects of Food Additives and Food Preservatives 24
4 Safety of Food Additives and Preservatives 25
1.11 Adulteration 26
1 History of Food Adulteration 27
2 Types of Food Adulteration 27
2.1 Intentional Adulteration 27
2.2 Incidental Adulteration 28
2.3 Metallic Adulteration 28
3 A Food Is Considered Adulterated if It Has the Following Factors 28
4 Effects of Adulterated Food on Human Health 28
5 Reasons for Food Adulteration 29
6 Methods of Food Adulteration 29
7 Trends of Food Adulteration in Developing Countries 30
1.12 Food Safety and Standards Act 30
1 Few Steps to Avoid Adulteration 32
2 Detection Methods of Adulteration 33
3 Technique to Check Food Adulteration 33
1.13 Conclusion 33
References 35
2 Additives and Preservatives Used in Food Processing and Preservation, and Their Health Implication 43
Sunita Adhikari (Nee Pramanik)
Abbreviations 44
2.1 Introduction 44
2.2 Merits and Demerits of Food Additives and Preservatives 47
2.2.1 Merits of Food Additives and Preservatives 47
2.2.2 Demerits of Food Additives and Preservatives 47
2.3 Types of Food Additives and Preservatives 48
2.3.1 Preservatives 48
2.3.2 Nutritional Additives 51
2.3.3 Flavoring Agent 51
2.3.4 Coloring Agent 51
2.3.5 Texturizing Agent 53
2.3.6 Miscellaneous Additives 54
2.3.6.1 Acidity Regulator 54
2.3.6.2 Anti-Caking Agent 54
2.3.6.3 Antifoaming Agent 54
2.3.6.4 Flour Treatment Agents 54
2.3.6.5 Fat Replacers 56
2.3.6.6 Sweeteners 56
2.3.6.7 Leavening Agent 61
2.3.6.8 Firming Agent 62
2.3.6.9 Glazing Agent 62
2.3.6.10 Humectant 62
2.3.6.11 Sequestering Agent 62
2.3.6.12 Gelling Agent 63
2.3.6.13 Propellants 63
2.3.6.14 Foaming Agent 63
2.3.6.15 Seasoning 63
2.3.6.16 Curing Agents 64
2.3.6.17 Probiotics 64
2.3.6.18 Other Food Additives 65
2.3.6.19 Indirect Food Additives 65
2.4 Health Effect of Food Additives and Preservatives 66
2.5 Conclusion 70
References 71
3 Role of Packaging in Food Processing 73
Bhasha Sharma, Susmita dey Sadhu, Rajni Chopra and Meenakshi Garg
3.1 Introduction 74
3.2 State-of-the-Art 76
3.3 Raw Materials Used in Food Packaging 78
3.3.1 Metals 79
3.3.2 Glass 80
3.3.3 Plastics 80
3.3.4 Paper and Cardboard 80
3.4 Packaging Footprints on Quality, Shelf Life, and Safety of Food 81
3.5 Prolegomenon on Active and Smart Packaging Systems 81
3.5.1 Active Packaging 82
3.5.2 Intelligent Packaging System 83
3.6 Aseptic Packaging in Food Processing 84
3.7 The Paradigm in Strategies for Improvement of Food Packaging 85
3.7.1 Bequest of Packaging Into the Cycle of Food Chain Sustainability 85
3.7.2 Selection of Materials With the Objective of Recyclability 86
3.7.3 Escalating Protective Role of Packaging 87
3.7.4 How Biodegradable Polymers can Mitigate the Plight of Packaging in Food Processing 88
3.8 Integration of Nanotechnology to Ameliorate Food Packaging 89
3.9 Life Cycle Assessment (LCA) 90
3.10 Deciphering the Challenges for Sustainable Food Packaging 91
3.11 Conclusion and the Way Forward 92
Acknowledgement 92
References 92
4 Laws Impacting Chemicals Added to Food 97
Preeti Khanna, Rajni Chopra and Meenakshi Garg
4.1 Introduction 98
4.2 Functions of Food Additives 98
4.2.1 Sustain or Enhance the Shelf Life and Freshness of a Product 99
4.2.2 Sustain or Enhance the Nutritional Quality of a Product 99
4.2.3 Improve the Aesthetic Appeal and Sensory Attributes of a Product 99
4.3 Classification of Food Additives 99
4.3.1 Classification Based on Functionality 99
4.3.1.1 Flavoring Agents 100
4.3.1.2 Enzyme Preparations 100
4.3.1.3 Other Additives 100
4.4 Classification Based on Primary and Secondary Technological Roles-Direct and Indirect Additives 101
4.5 Evaluating the Health Risk of Food Additives 101
4.6 International Regulations for the Efficacy of Food Additives 102
4.7 International Laws 102
4.7.1 US Food and Drug Administration 102
4.8 Indian Regulations-Food Safety and Standards Authority of India (FSSAI), Additives Regulations (Regulation 3.1) 103
4.9 Safety Assessment: Redbook's Principles of Safety Evaluation 105
4.10 Levels of Concern for Direct Food Additives 106
4.11 Threshold Regulation Exemption for Indirect Food Additives 107
4.12 Estimated Daily Intakes 108
4.13 Human Data and Clinical Studies 109
4.14 GRAS Substances 109
4.15 European Union Legislation 110
4.16 Categorization of Food Additives 110
1 Additives Can Be Used for the Following Purposes 110
4.17 Safety Assessment of Food Additives 111
4.18 Safety Evaluation Process and Authorization 112
4.19 Use of Food Additives in Food Products 113
1 Traditional Foods 113
2 Restricted Provisions 114
4.20 Labeling Regulations and Guidelines 114
4.21 Conclusion 114
References 114
5 Detection of Food Adulterants in Different Foodstuff 117
Aditi Negi, P Lakshmi Praba K., R Meenatchi and Akash Pare
5.1 Introduction 118
5.2 Types of Adulteration 118
5.3 Impact of Adulteration on Health 120
5.4 Approaches for Adulterant Authentication in Food Materials 121
5.5 Physical Authentication Techniques 122
5.6 Application of Biochemical and Analytical Methods in Adulterant Authentication 124
5.6.1 Adulterant Authentication Through HPLC 124
5.6.2 Adulterant Authentication Through GCMS 127
5.6.3 Adulterant Authentication Through Spectroscopic Method 127
5.6.4 Adulterant Authentication Through Ambient Mass Spectroscopy Techniques 128
5.6.5 Adulterant Authentication Through Nuclear Magnetic Resonance Technique 128
5.7 Adulterant Identification by Molecular Techniques 136
5.7.1 Polymerase Chain Reaction-Based Techniques for Adulterant Identification 137
5.7.2 Application of Real-Time PCR in Adulterant Authentication 142
5.7.3 Isothermal Amplification Methods for Adulterant Identification 142
5.7.4 Sequencing and Hybridization-Based Methods in Adulterant Identification 147
5.8 Limitation in Use of Molecular-Based Methods for Adulterant Authentication 148
5.9 Conclusion 152
References 152
6 Trends of Food Adulteration in Developing Countries and Its Remedies 165
Satyam Chachan, Anand Kishore, Khushbu Kumari and Arun Sharma
6.1 Introduction 166
6.2 Food Fraud in Developing Countries 166
6.2.1 Impact of Adulteration 168
6.3 Classification of Food Adulteration 169
6.3.1 Intentional Adulteration 171
6.4 Common Food Adulterants 172
6.5 Adulteration Remedy Strategies 177
6.5.1 Government and Regulatory Agency Initiative 177
6.5.2 Loopholes in Existing Method of Eliminating Adulteration 179
6.5.3 Process and Product Verification 181
6.5.4 Higher Levels of Transparency/Traceability in Supply Chain 182
6.5.5 Use of Novel Technology 182
6.5.6 Training 183
6.5.7 Awareness 183
6.6 Conclusion 185
References 186
7 Food Adulteration and Its Impacts on Our Health/Balanced Nutrition 189
Suka Thangaraju, Nikitha Modupalli and Venkatachalapathy Natarajan
7.1 Introduction 190
7.2 Types of Adulteration 192
7.2.1 Intentional Adulteration 192
7.2.2 Incidental Adulteration 193
7.2.3 Other Types of Adulteration 193
7.2.3.1 Natural Contamination 193
7.2.3.2 Metallic Contamination 193
7.2.3.3 Microbial Contamination 194
7.2.3.4 Adulteration in Organic Foods 195
7.2.3.5 Adulteration During Irradiation of Foods 195
7.2.3.6 Genetically Modified Foods 195
7.3 Adulteration in Foods 196
7.3.1 Global Food Environment 197
7.4 Effects of Food Adulteration 201
7.4.1 Health Effects 201
7.4.2 Balanced Nutrition 205
7.5 Measures to Mitigate Food Adulteration 206
7.5.1 Producer's or Manufacturer's End 206
7.5.2 Consumer's End 206
7.5.3 Government and Regulatory Agencies 207
References 209
8 Natural Food Toxins as Anti-Nutritional Factors in Plants and Their Reduction Strategies 217
Naman Kaur, Aparna Agarwal, Manisha Sabharwal and Nidhi Jaiswal
Abbreviations 218
8.1 Introduction 218
8.2 Anti-Nutritional Factor 221
8.2.1 Tannins 221
8.2.1.1 Types 222
8.2.1.2 Adverse Effects 222
8.2.2 Saponins 223
8.2.2.1 Saponins 223
8.2.2.2 Adverse Effects 224
8.2.3 Lectins and Hemagglutinin 225
8.2.3.1 Adverse Effects 226
8.2.4 Alkaloids 227
8.2.4.1 Adverse Health Effects 227
8.2.5 Oxalates 228
8.2.5.1 Adverse Effects 229
8.2.6 Cyanogenic Glycosides 230
8.2.6.1 Adverse Effects 231
8.2.7 Goitrogens 231
8.2.7.1 Adverse Effects 232
8.3 Methods to Reduce Levels of Anti-Nutritional Factors in Foods 234
8.3.1 Soaking 234
8.3.2 Fermentation 235
8.3.3 Germination 236
8.3.4 Milling 237
8.3.5 Extrusion 237
8.3.6 Heating-Autoclaving (Wet Heating) and Roasting (Dry Heating) 238
8.3.7 Gamma Radiation 239
8.3.8 Genomic Technology 239
8.4 Conclusion 240
References 240
9 Feeding the Future-Challenges and Limitations 249
Baishakhi De and Tridib Kumar Goswami
9.1 Introduction 250
9.2 Early Life Nutrition and Healthy Future 252
9.2.1 Choice of Food and "Nutrition Transition" 253
9.3 Challenges and Opportunities in Developing the Future Food Systems 255
9.4 Sustainable Diet for the Future 257
9.5 Research Trends and Green Food Technologies 259
9.5.1 Green Technologies in Food Processing 260
9.5.2 Nanotechnology in Food Processing and Food Safety 262
9.5.3 CRISPR-Based Technologies 262
9.5.4 Future Directives 265
9.5.4.1 3D Food Printing and Mass Customization of Diet 266
9.6 Regulations and Trade 270
9.7 Conclusion 270
References 271
10 Alternate Food Preservation Technology 275
Pratik S Gaikwad, Chayanika Sarma, Aditi Negi and Akash Pare
10.1 Introduction 276
10.2 Non-Thermal Preservation Technique 277
10.2.1 Packaging Technology 277
10.2.1.1 Challenges and Future Scope of MAP Processing 282
10.2.2 Ozone (O3) Treatment 282
10.2.2.1 Properties of O3 291
10.2.2.2 Principle of O3 Generation 291
10.2.2.3 Challenges and Future Scope of O3 Processing 292
10.2.3 High Hydrostatic Pressure Treatment 292
10.2.3.1 Principles of HPP Treatment 294
10.2.3.2 HPP Time 294
10.2.3.3 Challenges and Future Scope of HPP Treatment 295
10.2.4 Ultrasound Treatment 295
10.2.4.1 Principle of Ultrasound Treatment 296
10.2.4.2 Challenges and Future Scope of Ultrasound Treatment 296
10.2.5 Pulsed Electric Field Treatment 296
10.2.5.1 Principle of PEF Treatment 297
10.2.5.2 Challenges and Future Scope of PEF Treatment 298
10.2.6 Cold Plasma Treatment 298
10.2.6.1 Generation of CP Treatment 298
10.2.6.2 Challenges and Future Scope of CP 300
10.2.7 Oscillating Magnetic Field 300
10.2.7.1 Challenges and Future Scope of OMF 301
10.2.8 Membrane Filtration Process 301
10.2.8.1 Principle of the Membrane Filtration Process 301
10.2.8.2 Microfiltration 301
10.2.8.3 Ultrafiltration 302
10.2.8.4 Nanofiltration 303
10.2.8.5 Reverse Osmosis 303
10.2.8.6 Challenges and Future Scope of the Membrane Filtration Process 303
10.3 Novel-Thermal Preservation Technique 303
10.3.1 Ohmic Heating Treatment 303
10.3.1.1 Application of OH Treatment 304
10.3.1.2 Challenges and Future Scope of OH Treatment 311
10.3.2 Microwave Heating 311
10.3.2.1 Principle of MW Heating 311
10.3.2.2 Applications of MW Heating 312
10.3.2.3 Challenges and Future Scope of MW Heating 312
10.3.3 Infrared Heating (IRH) 312
10.3.3.1 Application of IRH 313
10.3.3.2 Challenges and Future Scope of IRH 313
10.3.4 Radio Frequency Heating 313
10.3.4.1 Principle of RF Heating 314
10.3.4.2 Factor Influencing of RF Heating 314
10.3.4.3 Challenges and Future Scope of RF Heating 314
10.4 Other Alternate Preservation Techniques 315
10.4.1 Freezing 315
10.4.1.1 Challenges and Future Scope of Freezing 316
10.4.2 Dehydration 316
10.4.3 Frying 317
10.4.4 Chilling 318
10.4.5 Extrusion 318
10.4.6 Three-Dimensional (3-D) Printing 319
10.4.6.1 Principle of 3-D Printing 319
10.4.6.2 Factor Influencing 3-D Printing 319
10.4.7 Blanching 320
10.5 Hurdle Technology for Preservation of Food 320
10.6 Irradiation Process for Preservation of Food 321
10.6.1 Electron Beam 327
10.6.2 X-Radiation (X-Ray) 327
10.6.3 Gamma Rays 327
10.7 Food Additives for the Preservation of Food 328
10.7.1 Natural Additives 328
10.7.2 Synthetic Additives 328
10.7.3 Challenges and Future Scope of Additives 331
10.8 Conclusion 332
References 332
11 Green Solvents for Food Processing Applications 341
A Surendra Babu, A Sangeetha and R Jaganmohan
11.1 Introduction 342
11.2 Green Solvents 344
11.2.1 Water as Green Solvent 345
11.2.2 Subcritical Water Extraction 346
11.2.3 Supercritical Fluids as Green Solvent 346
11.2.4 Gas Expanded Liquids as Green Solvent 347
11.2.5 Ionic Liquids as Green Solvent 348
11.2.5.1 Classification of Ionic Liquids 348
11.2.6 Solvents Derived From Biomass as Green Solvent 349
11.2.7 Deep Eutectic Solvents as Green Solvents 352
11.3 Synthesis of NADES 353
11.3.1 NADES for Extraction of Phenolic Compounds 355
11.3.2 NADES for Extraction of Flavonoids 360
11.3.3 NADES for Extraction of Other Polar Compounds 364
11.3.3.1 Ferulic Acid Extraction From Ligusticum Chuanxiong Hort and NADES 364
11.3.4 NADES for Extraction of Food Samples 364
11.3.4.1 Extraction of Vanillin With NADES 364
11.3.4.2 Extraction of Anthocyanins With NADES 364
11.3.4.3 Extraction of Phenolic Compounds With NADES 364
11.3.5 General Considerations Using NADES as Extraction Solvents 365
11.4 Conclusion and Future Trends 366
References 366
12 Technological Advancement in Food Additives and Preservatives 375
Shikha Pandhi, Arvind Kumar and Akansha Gupta
Abbreviations 376
12.1 Introduction 377
12.2 Food Additives and Preservatives 378
12.2.1 Classes of Food Additives 379
12.2.2 Significance in Food Processing and Preservation 381
12.2.3 Mechanism of Action of Food Preservatives 381
12.3 Regulatory Aspects of Food Additives and Preservatives 382
12.3.1 Generally Recognized as Safe 383
12.3.2 FSSAI Regulations on Permissible Limits of Food Additives 383
12.4 Health Concerns of Conventional Food Additives 383
12.5 Technological Advancements in Food Additives and Preservatives 384
12.5.1 Novel Food Additives 384
12.5.1.1 Essential Oils/Phytochemicals 385
12.5.1.2 Metallic Nanoparticles as Antimicrobial (Green Route) 386
12.6 Novel Technological Approaches for Enhanced Functionality 386
12.6.1 Nanoencapsulation 386
12.6.1.1 Fundamentals and Techniques 387
12.6.1.2 Types of Encapsulating Material 388
12.7 Methods for Food Additives Determination 389
12.7.1 Analytical Methods 389
12.7.1.1 Spectroscopy Techniques 389
12.7.1.2 Chromatographic Techniques 390
12.7.1.3 Electroanalytical Techniques 391
12.8 Future Prospects 391
12.9 Conclusion 392
References 393
13 Sensors for Non-Destructive Quality Evaluation of Food 397
Krishna Gopalakrishnan, Arun Sharma, Neela Emanuel, Pramod K Prabhakar and Ritesh Kumar
13.1 Introduction 398
13.2 Different Types of Non-Destructive Methods 400
13.2.1 Mechanical Method 400
13.2.1.1 Mechanical Thumb Method 400
13.2.1.2 Sinclair IQTM-Firmness Tester (SIQ-FT) 401
13.2.1.3 Laser Air-Puff 401
13.2.2 Chemical Method 401
13.2.2.1 Electronic Nose 401
13.2.3 Electromagnetic Method 404
13.2.3.1 Nuclear Magnetic Resonance (NMR) 404
13.2.3.2 Magnetic Resonance Imaging 406
13.2.4 Optical Method 408
13.2.4.1 NIR Spectroscopy 408
13.2.4.2 Image Analysis Techniques 410
13.2.4.3 Time-Resolved Reflectance Spectrometry 415
13.2.5 Dynamic Method 418
13.2.5.1 X-Rays 418
13.2.5.2 Computed Tomography 419
13.2.5.3 Ultrasonic 420
13.2.5.4 Acoustic Techniques 421
13.2.6 Sensor Fusion 423
13.3 Non-Destructive Quality Testing in Various Food Commodities 425
13.3.1 Staple Foods 425
13.3.1.1 Sensory Aspect 426
13.3.1.2 Adulteration Aspects 427
13.3.1.3 Chemical Aspects 427
13.3.2 Fruits 427
13.3.2.1 Fruit Quality Inspection Using Electronic Nose 429
13.3.2.2 Fruit Quality Inspection Using UV-VIS-NIR Spectroscopy 429
13.3.2.3 Fruit Quality Inspection Using Ultrasound Sensing Technique 430
13.3.2.4 Fruit Quality Inspection Using Machine Vision Sensing Technique 430
13.3.2.5 Fruit Quality Inspection Using Acoustic Impulse Technique 431
13.3.3 Vegetables 431
13.3.3.1 Spectroscopic Techniques 431
13.3.3.2 Sound Waves Techniques 434
13.3.3.3 Imaging Analysis Techniques 435
13.4 Conclusion 436
References 437
Index 451
1 Food Chemistry: Role of Additives, Preservatives, and Adulteration 1
Mousumi Sen
1.1 Introduction 2
1.2 Categories of Food Colors 2
1.3 Natural Colors Are Best Over Artificial Colors 3
1.4 Classification of Food Colorants 3
1.4.1 Natural Colorants 3
1.4.2 Synthetic Colorants 7
1.4.2.1 Water Soluble Synthetic Colors 7
1.4.2.2 Fat Soluble Synthetic Colorants 8
1.4.2.3 Lake Colorants 8
1.5 Classification of Food Additives 9
1.5.1 Why Food Colors Are Preferred 12
1.5.2 E-Numbering 13
1.6 Food Spoilage and Preservation 14
1.6.1 Causes of Spoilage 14
1.6.2 Principle of Food Preservation 15
1.7 Preservatives 15
1.7.1 Factors Affecting Preservative Efficiency 15
1.7.1.1 Interaction With Formulation Components 15
1.7.1.2 Properties of Preservatives 16
1.7.1.3 Effect of Containers 16
1.7.1.4 Types of Micro-Organisms 16
1.7.1.5 Influence of pH 16
1.7.2 Factors Affecting Chemical Preservation 17
1.7.3 Classification of Chemical Preservatives 17
1.7.4 Types of Chemical Preservatives 17
1.7.5 Natural Chemical Preservatives 18
1.7.6 Methods of Food Preservation 19
1.8 Antioxidants 20
1.9 Oils and Spices 21
1.10 Introduction to Hurdle Technology 22
1 Advantages of Food Additives and Preservatives 23
2 Disadvantages of Food Additives and Preservatives 23
3 Effects of Food Additives and Food Preservatives 24
4 Safety of Food Additives and Preservatives 25
1.11 Adulteration 26
1 History of Food Adulteration 27
2 Types of Food Adulteration 27
2.1 Intentional Adulteration 27
2.2 Incidental Adulteration 28
2.3 Metallic Adulteration 28
3 A Food Is Considered Adulterated if It Has the Following Factors 28
4 Effects of Adulterated Food on Human Health 28
5 Reasons for Food Adulteration 29
6 Methods of Food Adulteration 29
7 Trends of Food Adulteration in Developing Countries 30
1.12 Food Safety and Standards Act 30
1 Few Steps to Avoid Adulteration 32
2 Detection Methods of Adulteration 33
3 Technique to Check Food Adulteration 33
1.13 Conclusion 33
References 35
2 Additives and Preservatives Used in Food Processing and Preservation, and Their Health Implication 43
Sunita Adhikari (Nee Pramanik)
Abbreviations 44
2.1 Introduction 44
2.2 Merits and Demerits of Food Additives and Preservatives 47
2.2.1 Merits of Food Additives and Preservatives 47
2.2.2 Demerits of Food Additives and Preservatives 47
2.3 Types of Food Additives and Preservatives 48
2.3.1 Preservatives 48
2.3.2 Nutritional Additives 51
2.3.3 Flavoring Agent 51
2.3.4 Coloring Agent 51
2.3.5 Texturizing Agent 53
2.3.6 Miscellaneous Additives 54
2.3.6.1 Acidity Regulator 54
2.3.6.2 Anti-Caking Agent 54
2.3.6.3 Antifoaming Agent 54
2.3.6.4 Flour Treatment Agents 54
2.3.6.5 Fat Replacers 56
2.3.6.6 Sweeteners 56
2.3.6.7 Leavening Agent 61
2.3.6.8 Firming Agent 62
2.3.6.9 Glazing Agent 62
2.3.6.10 Humectant 62
2.3.6.11 Sequestering Agent 62
2.3.6.12 Gelling Agent 63
2.3.6.13 Propellants 63
2.3.6.14 Foaming Agent 63
2.3.6.15 Seasoning 63
2.3.6.16 Curing Agents 64
2.3.6.17 Probiotics 64
2.3.6.18 Other Food Additives 65
2.3.6.19 Indirect Food Additives 65
2.4 Health Effect of Food Additives and Preservatives 66
2.5 Conclusion 70
References 71
3 Role of Packaging in Food Processing 73
Bhasha Sharma, Susmita dey Sadhu, Rajni Chopra and Meenakshi Garg
3.1 Introduction 74
3.2 State-of-the-Art 76
3.3 Raw Materials Used in Food Packaging 78
3.3.1 Metals 79
3.3.2 Glass 80
3.3.3 Plastics 80
3.3.4 Paper and Cardboard 80
3.4 Packaging Footprints on Quality, Shelf Life, and Safety of Food 81
3.5 Prolegomenon on Active and Smart Packaging Systems 81
3.5.1 Active Packaging 82
3.5.2 Intelligent Packaging System 83
3.6 Aseptic Packaging in Food Processing 84
3.7 The Paradigm in Strategies for Improvement of Food Packaging 85
3.7.1 Bequest of Packaging Into the Cycle of Food Chain Sustainability 85
3.7.2 Selection of Materials With the Objective of Recyclability 86
3.7.3 Escalating Protective Role of Packaging 87
3.7.4 How Biodegradable Polymers can Mitigate the Plight of Packaging in Food Processing 88
3.8 Integration of Nanotechnology to Ameliorate Food Packaging 89
3.9 Life Cycle Assessment (LCA) 90
3.10 Deciphering the Challenges for Sustainable Food Packaging 91
3.11 Conclusion and the Way Forward 92
Acknowledgement 92
References 92
4 Laws Impacting Chemicals Added to Food 97
Preeti Khanna, Rajni Chopra and Meenakshi Garg
4.1 Introduction 98
4.2 Functions of Food Additives 98
4.2.1 Sustain or Enhance the Shelf Life and Freshness of a Product 99
4.2.2 Sustain or Enhance the Nutritional Quality of a Product 99
4.2.3 Improve the Aesthetic Appeal and Sensory Attributes of a Product 99
4.3 Classification of Food Additives 99
4.3.1 Classification Based on Functionality 99
4.3.1.1 Flavoring Agents 100
4.3.1.2 Enzyme Preparations 100
4.3.1.3 Other Additives 100
4.4 Classification Based on Primary and Secondary Technological Roles-Direct and Indirect Additives 101
4.5 Evaluating the Health Risk of Food Additives 101
4.6 International Regulations for the Efficacy of Food Additives 102
4.7 International Laws 102
4.7.1 US Food and Drug Administration 102
4.8 Indian Regulations-Food Safety and Standards Authority of India (FSSAI), Additives Regulations (Regulation 3.1) 103
4.9 Safety Assessment: Redbook's Principles of Safety Evaluation 105
4.10 Levels of Concern for Direct Food Additives 106
4.11 Threshold Regulation Exemption for Indirect Food Additives 107
4.12 Estimated Daily Intakes 108
4.13 Human Data and Clinical Studies 109
4.14 GRAS Substances 109
4.15 European Union Legislation 110
4.16 Categorization of Food Additives 110
1 Additives Can Be Used for the Following Purposes 110
4.17 Safety Assessment of Food Additives 111
4.18 Safety Evaluation Process and Authorization 112
4.19 Use of Food Additives in Food Products 113
1 Traditional Foods 113
2 Restricted Provisions 114
4.20 Labeling Regulations and Guidelines 114
4.21 Conclusion 114
References 114
5 Detection of Food Adulterants in Different Foodstuff 117
Aditi Negi, P Lakshmi Praba K., R Meenatchi and Akash Pare
5.1 Introduction 118
5.2 Types of Adulteration 118
5.3 Impact of Adulteration on Health 120
5.4 Approaches for Adulterant Authentication in Food Materials 121
5.5 Physical Authentication Techniques 122
5.6 Application of Biochemical and Analytical Methods in Adulterant Authentication 124
5.6.1 Adulterant Authentication Through HPLC 124
5.6.2 Adulterant Authentication Through GCMS 127
5.6.3 Adulterant Authentication Through Spectroscopic Method 127
5.6.4 Adulterant Authentication Through Ambient Mass Spectroscopy Techniques 128
5.6.5 Adulterant Authentication Through Nuclear Magnetic Resonance Technique 128
5.7 Adulterant Identification by Molecular Techniques 136
5.7.1 Polymerase Chain Reaction-Based Techniques for Adulterant Identification 137
5.7.2 Application of Real-Time PCR in Adulterant Authentication 142
5.7.3 Isothermal Amplification Methods for Adulterant Identification 142
5.7.4 Sequencing and Hybridization-Based Methods in Adulterant Identification 147
5.8 Limitation in Use of Molecular-Based Methods for Adulterant Authentication 148
5.9 Conclusion 152
References 152
6 Trends of Food Adulteration in Developing Countries and Its Remedies 165
Satyam Chachan, Anand Kishore, Khushbu Kumari and Arun Sharma
6.1 Introduction 166
6.2 Food Fraud in Developing Countries 166
6.2.1 Impact of Adulteration 168
6.3 Classification of Food Adulteration 169
6.3.1 Intentional Adulteration 171
6.4 Common Food Adulterants 172
6.5 Adulteration Remedy Strategies 177
6.5.1 Government and Regulatory Agency Initiative 177
6.5.2 Loopholes in Existing Method of Eliminating Adulteration 179
6.5.3 Process and Product Verification 181
6.5.4 Higher Levels of Transparency/Traceability in Supply Chain 182
6.5.5 Use of Novel Technology 182
6.5.6 Training 183
6.5.7 Awareness 183
6.6 Conclusion 185
References 186
7 Food Adulteration and Its Impacts on Our Health/Balanced Nutrition 189
Suka Thangaraju, Nikitha Modupalli and Venkatachalapathy Natarajan
7.1 Introduction 190
7.2 Types of Adulteration 192
7.2.1 Intentional Adulteration 192
7.2.2 Incidental Adulteration 193
7.2.3 Other Types of Adulteration 193
7.2.3.1 Natural Contamination 193
7.2.3.2 Metallic Contamination 193
7.2.3.3 Microbial Contamination 194
7.2.3.4 Adulteration in Organic Foods 195
7.2.3.5 Adulteration During Irradiation of Foods 195
7.2.3.6 Genetically Modified Foods 195
7.3 Adulteration in Foods 196
7.3.1 Global Food Environment 197
7.4 Effects of Food Adulteration 201
7.4.1 Health Effects 201
7.4.2 Balanced Nutrition 205
7.5 Measures to Mitigate Food Adulteration 206
7.5.1 Producer's or Manufacturer's End 206
7.5.2 Consumer's End 206
7.5.3 Government and Regulatory Agencies 207
References 209
8 Natural Food Toxins as Anti-Nutritional Factors in Plants and Their Reduction Strategies 217
Naman Kaur, Aparna Agarwal, Manisha Sabharwal and Nidhi Jaiswal
Abbreviations 218
8.1 Introduction 218
8.2 Anti-Nutritional Factor 221
8.2.1 Tannins 221
8.2.1.1 Types 222
8.2.1.2 Adverse Effects 222
8.2.2 Saponins 223
8.2.2.1 Saponins 223
8.2.2.2 Adverse Effects 224
8.2.3 Lectins and Hemagglutinin 225
8.2.3.1 Adverse Effects 226
8.2.4 Alkaloids 227
8.2.4.1 Adverse Health Effects 227
8.2.5 Oxalates 228
8.2.5.1 Adverse Effects 229
8.2.6 Cyanogenic Glycosides 230
8.2.6.1 Adverse Effects 231
8.2.7 Goitrogens 231
8.2.7.1 Adverse Effects 232
8.3 Methods to Reduce Levels of Anti-Nutritional Factors in Foods 234
8.3.1 Soaking 234
8.3.2 Fermentation 235
8.3.3 Germination 236
8.3.4 Milling 237
8.3.5 Extrusion 237
8.3.6 Heating-Autoclaving (Wet Heating) and Roasting (Dry Heating) 238
8.3.7 Gamma Radiation 239
8.3.8 Genomic Technology 239
8.4 Conclusion 240
References 240
9 Feeding the Future-Challenges and Limitations 249
Baishakhi De and Tridib Kumar Goswami
9.1 Introduction 250
9.2 Early Life Nutrition and Healthy Future 252
9.2.1 Choice of Food and "Nutrition Transition" 253
9.3 Challenges and Opportunities in Developing the Future Food Systems 255
9.4 Sustainable Diet for the Future 257
9.5 Research Trends and Green Food Technologies 259
9.5.1 Green Technologies in Food Processing 260
9.5.2 Nanotechnology in Food Processing and Food Safety 262
9.5.3 CRISPR-Based Technologies 262
9.5.4 Future Directives 265
9.5.4.1 3D Food Printing and Mass Customization of Diet 266
9.6 Regulations and Trade 270
9.7 Conclusion 270
References 271
10 Alternate Food Preservation Technology 275
Pratik S Gaikwad, Chayanika Sarma, Aditi Negi and Akash Pare
10.1 Introduction 276
10.2 Non-Thermal Preservation Technique 277
10.2.1 Packaging Technology 277
10.2.1.1 Challenges and Future Scope of MAP Processing 282
10.2.2 Ozone (O3) Treatment 282
10.2.2.1 Properties of O3 291
10.2.2.2 Principle of O3 Generation 291
10.2.2.3 Challenges and Future Scope of O3 Processing 292
10.2.3 High Hydrostatic Pressure Treatment 292
10.2.3.1 Principles of HPP Treatment 294
10.2.3.2 HPP Time 294
10.2.3.3 Challenges and Future Scope of HPP Treatment 295
10.2.4 Ultrasound Treatment 295
10.2.4.1 Principle of Ultrasound Treatment 296
10.2.4.2 Challenges and Future Scope of Ultrasound Treatment 296
10.2.5 Pulsed Electric Field Treatment 296
10.2.5.1 Principle of PEF Treatment 297
10.2.5.2 Challenges and Future Scope of PEF Treatment 298
10.2.6 Cold Plasma Treatment 298
10.2.6.1 Generation of CP Treatment 298
10.2.6.2 Challenges and Future Scope of CP 300
10.2.7 Oscillating Magnetic Field 300
10.2.7.1 Challenges and Future Scope of OMF 301
10.2.8 Membrane Filtration Process 301
10.2.8.1 Principle of the Membrane Filtration Process 301
10.2.8.2 Microfiltration 301
10.2.8.3 Ultrafiltration 302
10.2.8.4 Nanofiltration 303
10.2.8.5 Reverse Osmosis 303
10.2.8.6 Challenges and Future Scope of the Membrane Filtration Process 303
10.3 Novel-Thermal Preservation Technique 303
10.3.1 Ohmic Heating Treatment 303
10.3.1.1 Application of OH Treatment 304
10.3.1.2 Challenges and Future Scope of OH Treatment 311
10.3.2 Microwave Heating 311
10.3.2.1 Principle of MW Heating 311
10.3.2.2 Applications of MW Heating 312
10.3.2.3 Challenges and Future Scope of MW Heating 312
10.3.3 Infrared Heating (IRH) 312
10.3.3.1 Application of IRH 313
10.3.3.2 Challenges and Future Scope of IRH 313
10.3.4 Radio Frequency Heating 313
10.3.4.1 Principle of RF Heating 314
10.3.4.2 Factor Influencing of RF Heating 314
10.3.4.3 Challenges and Future Scope of RF Heating 314
10.4 Other Alternate Preservation Techniques 315
10.4.1 Freezing 315
10.4.1.1 Challenges and Future Scope of Freezing 316
10.4.2 Dehydration 316
10.4.3 Frying 317
10.4.4 Chilling 318
10.4.5 Extrusion 318
10.4.6 Three-Dimensional (3-D) Printing 319
10.4.6.1 Principle of 3-D Printing 319
10.4.6.2 Factor Influencing 3-D Printing 319
10.4.7 Blanching 320
10.5 Hurdle Technology for Preservation of Food 320
10.6 Irradiation Process for Preservation of Food 321
10.6.1 Electron Beam 327
10.6.2 X-Radiation (X-Ray) 327
10.6.3 Gamma Rays 327
10.7 Food Additives for the Preservation of Food 328
10.7.1 Natural Additives 328
10.7.2 Synthetic Additives 328
10.7.3 Challenges and Future Scope of Additives 331
10.8 Conclusion 332
References 332
11 Green Solvents for Food Processing Applications 341
A Surendra Babu, A Sangeetha and R Jaganmohan
11.1 Introduction 342
11.2 Green Solvents 344
11.2.1 Water as Green Solvent 345
11.2.2 Subcritical Water Extraction 346
11.2.3 Supercritical Fluids as Green Solvent 346
11.2.4 Gas Expanded Liquids as Green Solvent 347
11.2.5 Ionic Liquids as Green Solvent 348
11.2.5.1 Classification of Ionic Liquids 348
11.2.6 Solvents Derived From Biomass as Green Solvent 349
11.2.7 Deep Eutectic Solvents as Green Solvents 352
11.3 Synthesis of NADES 353
11.3.1 NADES for Extraction of Phenolic Compounds 355
11.3.2 NADES for Extraction of Flavonoids 360
11.3.3 NADES for Extraction of Other Polar Compounds 364
11.3.3.1 Ferulic Acid Extraction From Ligusticum Chuanxiong Hort and NADES 364
11.3.4 NADES for Extraction of Food Samples 364
11.3.4.1 Extraction of Vanillin With NADES 364
11.3.4.2 Extraction of Anthocyanins With NADES 364
11.3.4.3 Extraction of Phenolic Compounds With NADES 364
11.3.5 General Considerations Using NADES as Extraction Solvents 365
11.4 Conclusion and Future Trends 366
References 366
12 Technological Advancement in Food Additives and Preservatives 375
Shikha Pandhi, Arvind Kumar and Akansha Gupta
Abbreviations 376
12.1 Introduction 377
12.2 Food Additives and Preservatives 378
12.2.1 Classes of Food Additives 379
12.2.2 Significance in Food Processing and Preservation 381
12.2.3 Mechanism of Action of Food Preservatives 381
12.3 Regulatory Aspects of Food Additives and Preservatives 382
12.3.1 Generally Recognized as Safe 383
12.3.2 FSSAI Regulations on Permissible Limits of Food Additives 383
12.4 Health Concerns of Conventional Food Additives 383
12.5 Technological Advancements in Food Additives and Preservatives 384
12.5.1 Novel Food Additives 384
12.5.1.1 Essential Oils/Phytochemicals 385
12.5.1.2 Metallic Nanoparticles as Antimicrobial (Green Route) 386
12.6 Novel Technological Approaches for Enhanced Functionality 386
12.6.1 Nanoencapsulation 386
12.6.1.1 Fundamentals and Techniques 387
12.6.1.2 Types of Encapsulating Material 388
12.7 Methods for Food Additives Determination 389
12.7.1 Analytical Methods 389
12.7.1.1 Spectroscopy Techniques 389
12.7.1.2 Chromatographic Techniques 390
12.7.1.3 Electroanalytical Techniques 391
12.8 Future Prospects 391
12.9 Conclusion 392
References 393
13 Sensors for Non-Destructive Quality Evaluation of Food 397
Krishna Gopalakrishnan, Arun Sharma, Neela Emanuel, Pramod K Prabhakar and Ritesh Kumar
13.1 Introduction 398
13.2 Different Types of Non-Destructive Methods 400
13.2.1 Mechanical Method 400
13.2.1.1 Mechanical Thumb Method 400
13.2.1.2 Sinclair IQTM-Firmness Tester (SIQ-FT) 401
13.2.1.3 Laser Air-Puff 401
13.2.2 Chemical Method 401
13.2.2.1 Electronic Nose 401
13.2.3 Electromagnetic Method 404
13.2.3.1 Nuclear Magnetic Resonance (NMR) 404
13.2.3.2 Magnetic Resonance Imaging 406
13.2.4 Optical Method 408
13.2.4.1 NIR Spectroscopy 408
13.2.4.2 Image Analysis Techniques 410
13.2.4.3 Time-Resolved Reflectance Spectrometry 415
13.2.5 Dynamic Method 418
13.2.5.1 X-Rays 418
13.2.5.2 Computed Tomography 419
13.2.5.3 Ultrasonic 420
13.2.5.4 Acoustic Techniques 421
13.2.6 Sensor Fusion 423
13.3 Non-Destructive Quality Testing in Various Food Commodities 425
13.3.1 Staple Foods 425
13.3.1.1 Sensory Aspect 426
13.3.1.2 Adulteration Aspects 427
13.3.1.3 Chemical Aspects 427
13.3.2 Fruits 427
13.3.2.1 Fruit Quality Inspection Using Electronic Nose 429
13.3.2.2 Fruit Quality Inspection Using UV-VIS-NIR Spectroscopy 429
13.3.2.3 Fruit Quality Inspection Using Ultrasound Sensing Technique 430
13.3.2.4 Fruit Quality Inspection Using Machine Vision Sensing Technique 430
13.3.2.5 Fruit Quality Inspection Using Acoustic Impulse Technique 431
13.3.3 Vegetables 431
13.3.3.1 Spectroscopic Techniques 431
13.3.3.2 Sound Waves Techniques 434
13.3.3.3 Imaging Analysis Techniques 435
13.4 Conclusion 436
References 437
Index 451
Este título pertence ao(s) assunto(s) indicados(s). Para ver outros títulos clique no assunto desejado.
Food chemistry; role of additives; preservatives and adulteration; processing and preservation; packaging in food processing; laws impacting chemicals; adulterants in different foodstuff; impacts on our health/balance nutrition; food toxicity and forensics; feeding the future; alternative preservation technology; green solvents; technological advancement; sensors; non-destructive quality evaluation
Preface xix
1 Food Chemistry: Role of Additives, Preservatives, and Adulteration 1
Mousumi Sen
1.1 Introduction 2
1.2 Categories of Food Colors 2
1.3 Natural Colors Are Best Over Artificial Colors 3
1.4 Classification of Food Colorants 3
1.4.1 Natural Colorants 3
1.4.2 Synthetic Colorants 7
1.4.2.1 Water Soluble Synthetic Colors 7
1.4.2.2 Fat Soluble Synthetic Colorants 8
1.4.2.3 Lake Colorants 8
1.5 Classification of Food Additives 9
1.5.1 Why Food Colors Are Preferred 12
1.5.2 E-Numbering 13
1.6 Food Spoilage and Preservation 14
1.6.1 Causes of Spoilage 14
1.6.2 Principle of Food Preservation 15
1.7 Preservatives 15
1.7.1 Factors Affecting Preservative Efficiency 15
1.7.1.1 Interaction With Formulation Components 15
1.7.1.2 Properties of Preservatives 16
1.7.1.3 Effect of Containers 16
1.7.1.4 Types of Micro-Organisms 16
1.7.1.5 Influence of pH 16
1.7.2 Factors Affecting Chemical Preservation 17
1.7.3 Classification of Chemical Preservatives 17
1.7.4 Types of Chemical Preservatives 17
1.7.5 Natural Chemical Preservatives 18
1.7.6 Methods of Food Preservation 19
1.8 Antioxidants 20
1.9 Oils and Spices 21
1.10 Introduction to Hurdle Technology 22
1 Advantages of Food Additives and Preservatives 23
2 Disadvantages of Food Additives and Preservatives 23
3 Effects of Food Additives and Food Preservatives 24
4 Safety of Food Additives and Preservatives 25
1.11 Adulteration 26
1 History of Food Adulteration 27
2 Types of Food Adulteration 27
2.1 Intentional Adulteration 27
2.2 Incidental Adulteration 28
2.3 Metallic Adulteration 28
3 A Food Is Considered Adulterated if It Has the Following Factors 28
4 Effects of Adulterated Food on Human Health 28
5 Reasons for Food Adulteration 29
6 Methods of Food Adulteration 29
7 Trends of Food Adulteration in Developing Countries 30
1.12 Food Safety and Standards Act 30
1 Few Steps to Avoid Adulteration 32
2 Detection Methods of Adulteration 33
3 Technique to Check Food Adulteration 33
1.13 Conclusion 33
References 35
2 Additives and Preservatives Used in Food Processing and Preservation, and Their Health Implication 43
Sunita Adhikari (Nee Pramanik)
Abbreviations 44
2.1 Introduction 44
2.2 Merits and Demerits of Food Additives and Preservatives 47
2.2.1 Merits of Food Additives and Preservatives 47
2.2.2 Demerits of Food Additives and Preservatives 47
2.3 Types of Food Additives and Preservatives 48
2.3.1 Preservatives 48
2.3.2 Nutritional Additives 51
2.3.3 Flavoring Agent 51
2.3.4 Coloring Agent 51
2.3.5 Texturizing Agent 53
2.3.6 Miscellaneous Additives 54
2.3.6.1 Acidity Regulator 54
2.3.6.2 Anti-Caking Agent 54
2.3.6.3 Antifoaming Agent 54
2.3.6.4 Flour Treatment Agents 54
2.3.6.5 Fat Replacers 56
2.3.6.6 Sweeteners 56
2.3.6.7 Leavening Agent 61
2.3.6.8 Firming Agent 62
2.3.6.9 Glazing Agent 62
2.3.6.10 Humectant 62
2.3.6.11 Sequestering Agent 62
2.3.6.12 Gelling Agent 63
2.3.6.13 Propellants 63
2.3.6.14 Foaming Agent 63
2.3.6.15 Seasoning 63
2.3.6.16 Curing Agents 64
2.3.6.17 Probiotics 64
2.3.6.18 Other Food Additives 65
2.3.6.19 Indirect Food Additives 65
2.4 Health Effect of Food Additives and Preservatives 66
2.5 Conclusion 70
References 71
3 Role of Packaging in Food Processing 73
Bhasha Sharma, Susmita dey Sadhu, Rajni Chopra and Meenakshi Garg
3.1 Introduction 74
3.2 State-of-the-Art 76
3.3 Raw Materials Used in Food Packaging 78
3.3.1 Metals 79
3.3.2 Glass 80
3.3.3 Plastics 80
3.3.4 Paper and Cardboard 80
3.4 Packaging Footprints on Quality, Shelf Life, and Safety of Food 81
3.5 Prolegomenon on Active and Smart Packaging Systems 81
3.5.1 Active Packaging 82
3.5.2 Intelligent Packaging System 83
3.6 Aseptic Packaging in Food Processing 84
3.7 The Paradigm in Strategies for Improvement of Food Packaging 85
3.7.1 Bequest of Packaging Into the Cycle of Food Chain Sustainability 85
3.7.2 Selection of Materials With the Objective of Recyclability 86
3.7.3 Escalating Protective Role of Packaging 87
3.7.4 How Biodegradable Polymers can Mitigate the Plight of Packaging in Food Processing 88
3.8 Integration of Nanotechnology to Ameliorate Food Packaging 89
3.9 Life Cycle Assessment (LCA) 90
3.10 Deciphering the Challenges for Sustainable Food Packaging 91
3.11 Conclusion and the Way Forward 92
Acknowledgement 92
References 92
4 Laws Impacting Chemicals Added to Food 97
Preeti Khanna, Rajni Chopra and Meenakshi Garg
4.1 Introduction 98
4.2 Functions of Food Additives 98
4.2.1 Sustain or Enhance the Shelf Life and Freshness of a Product 99
4.2.2 Sustain or Enhance the Nutritional Quality of a Product 99
4.2.3 Improve the Aesthetic Appeal and Sensory Attributes of a Product 99
4.3 Classification of Food Additives 99
4.3.1 Classification Based on Functionality 99
4.3.1.1 Flavoring Agents 100
4.3.1.2 Enzyme Preparations 100
4.3.1.3 Other Additives 100
4.4 Classification Based on Primary and Secondary Technological Roles-Direct and Indirect Additives 101
4.5 Evaluating the Health Risk of Food Additives 101
4.6 International Regulations for the Efficacy of Food Additives 102
4.7 International Laws 102
4.7.1 US Food and Drug Administration 102
4.8 Indian Regulations-Food Safety and Standards Authority of India (FSSAI), Additives Regulations (Regulation 3.1) 103
4.9 Safety Assessment: Redbook's Principles of Safety Evaluation 105
4.10 Levels of Concern for Direct Food Additives 106
4.11 Threshold Regulation Exemption for Indirect Food Additives 107
4.12 Estimated Daily Intakes 108
4.13 Human Data and Clinical Studies 109
4.14 GRAS Substances 109
4.15 European Union Legislation 110
4.16 Categorization of Food Additives 110
1 Additives Can Be Used for the Following Purposes 110
4.17 Safety Assessment of Food Additives 111
4.18 Safety Evaluation Process and Authorization 112
4.19 Use of Food Additives in Food Products 113
1 Traditional Foods 113
2 Restricted Provisions 114
4.20 Labeling Regulations and Guidelines 114
4.21 Conclusion 114
References 114
5 Detection of Food Adulterants in Different Foodstuff 117
Aditi Negi, P Lakshmi Praba K., R Meenatchi and Akash Pare
5.1 Introduction 118
5.2 Types of Adulteration 118
5.3 Impact of Adulteration on Health 120
5.4 Approaches for Adulterant Authentication in Food Materials 121
5.5 Physical Authentication Techniques 122
5.6 Application of Biochemical and Analytical Methods in Adulterant Authentication 124
5.6.1 Adulterant Authentication Through HPLC 124
5.6.2 Adulterant Authentication Through GCMS 127
5.6.3 Adulterant Authentication Through Spectroscopic Method 127
5.6.4 Adulterant Authentication Through Ambient Mass Spectroscopy Techniques 128
5.6.5 Adulterant Authentication Through Nuclear Magnetic Resonance Technique 128
5.7 Adulterant Identification by Molecular Techniques 136
5.7.1 Polymerase Chain Reaction-Based Techniques for Adulterant Identification 137
5.7.2 Application of Real-Time PCR in Adulterant Authentication 142
5.7.3 Isothermal Amplification Methods for Adulterant Identification 142
5.7.4 Sequencing and Hybridization-Based Methods in Adulterant Identification 147
5.8 Limitation in Use of Molecular-Based Methods for Adulterant Authentication 148
5.9 Conclusion 152
References 152
6 Trends of Food Adulteration in Developing Countries and Its Remedies 165
Satyam Chachan, Anand Kishore, Khushbu Kumari and Arun Sharma
6.1 Introduction 166
6.2 Food Fraud in Developing Countries 166
6.2.1 Impact of Adulteration 168
6.3 Classification of Food Adulteration 169
6.3.1 Intentional Adulteration 171
6.4 Common Food Adulterants 172
6.5 Adulteration Remedy Strategies 177
6.5.1 Government and Regulatory Agency Initiative 177
6.5.2 Loopholes in Existing Method of Eliminating Adulteration 179
6.5.3 Process and Product Verification 181
6.5.4 Higher Levels of Transparency/Traceability in Supply Chain 182
6.5.5 Use of Novel Technology 182
6.5.6 Training 183
6.5.7 Awareness 183
6.6 Conclusion 185
References 186
7 Food Adulteration and Its Impacts on Our Health/Balanced Nutrition 189
Suka Thangaraju, Nikitha Modupalli and Venkatachalapathy Natarajan
7.1 Introduction 190
7.2 Types of Adulteration 192
7.2.1 Intentional Adulteration 192
7.2.2 Incidental Adulteration 193
7.2.3 Other Types of Adulteration 193
7.2.3.1 Natural Contamination 193
7.2.3.2 Metallic Contamination 193
7.2.3.3 Microbial Contamination 194
7.2.3.4 Adulteration in Organic Foods 195
7.2.3.5 Adulteration During Irradiation of Foods 195
7.2.3.6 Genetically Modified Foods 195
7.3 Adulteration in Foods 196
7.3.1 Global Food Environment 197
7.4 Effects of Food Adulteration 201
7.4.1 Health Effects 201
7.4.2 Balanced Nutrition 205
7.5 Measures to Mitigate Food Adulteration 206
7.5.1 Producer's or Manufacturer's End 206
7.5.2 Consumer's End 206
7.5.3 Government and Regulatory Agencies 207
References 209
8 Natural Food Toxins as Anti-Nutritional Factors in Plants and Their Reduction Strategies 217
Naman Kaur, Aparna Agarwal, Manisha Sabharwal and Nidhi Jaiswal
Abbreviations 218
8.1 Introduction 218
8.2 Anti-Nutritional Factor 221
8.2.1 Tannins 221
8.2.1.1 Types 222
8.2.1.2 Adverse Effects 222
8.2.2 Saponins 223
8.2.2.1 Saponins 223
8.2.2.2 Adverse Effects 224
8.2.3 Lectins and Hemagglutinin 225
8.2.3.1 Adverse Effects 226
8.2.4 Alkaloids 227
8.2.4.1 Adverse Health Effects 227
8.2.5 Oxalates 228
8.2.5.1 Adverse Effects 229
8.2.6 Cyanogenic Glycosides 230
8.2.6.1 Adverse Effects 231
8.2.7 Goitrogens 231
8.2.7.1 Adverse Effects 232
8.3 Methods to Reduce Levels of Anti-Nutritional Factors in Foods 234
8.3.1 Soaking 234
8.3.2 Fermentation 235
8.3.3 Germination 236
8.3.4 Milling 237
8.3.5 Extrusion 237
8.3.6 Heating-Autoclaving (Wet Heating) and Roasting (Dry Heating) 238
8.3.7 Gamma Radiation 239
8.3.8 Genomic Technology 239
8.4 Conclusion 240
References 240
9 Feeding the Future-Challenges and Limitations 249
Baishakhi De and Tridib Kumar Goswami
9.1 Introduction 250
9.2 Early Life Nutrition and Healthy Future 252
9.2.1 Choice of Food and "Nutrition Transition" 253
9.3 Challenges and Opportunities in Developing the Future Food Systems 255
9.4 Sustainable Diet for the Future 257
9.5 Research Trends and Green Food Technologies 259
9.5.1 Green Technologies in Food Processing 260
9.5.2 Nanotechnology in Food Processing and Food Safety 262
9.5.3 CRISPR-Based Technologies 262
9.5.4 Future Directives 265
9.5.4.1 3D Food Printing and Mass Customization of Diet 266
9.6 Regulations and Trade 270
9.7 Conclusion 270
References 271
10 Alternate Food Preservation Technology 275
Pratik S Gaikwad, Chayanika Sarma, Aditi Negi and Akash Pare
10.1 Introduction 276
10.2 Non-Thermal Preservation Technique 277
10.2.1 Packaging Technology 277
10.2.1.1 Challenges and Future Scope of MAP Processing 282
10.2.2 Ozone (O3) Treatment 282
10.2.2.1 Properties of O3 291
10.2.2.2 Principle of O3 Generation 291
10.2.2.3 Challenges and Future Scope of O3 Processing 292
10.2.3 High Hydrostatic Pressure Treatment 292
10.2.3.1 Principles of HPP Treatment 294
10.2.3.2 HPP Time 294
10.2.3.3 Challenges and Future Scope of HPP Treatment 295
10.2.4 Ultrasound Treatment 295
10.2.4.1 Principle of Ultrasound Treatment 296
10.2.4.2 Challenges and Future Scope of Ultrasound Treatment 296
10.2.5 Pulsed Electric Field Treatment 296
10.2.5.1 Principle of PEF Treatment 297
10.2.5.2 Challenges and Future Scope of PEF Treatment 298
10.2.6 Cold Plasma Treatment 298
10.2.6.1 Generation of CP Treatment 298
10.2.6.2 Challenges and Future Scope of CP 300
10.2.7 Oscillating Magnetic Field 300
10.2.7.1 Challenges and Future Scope of OMF 301
10.2.8 Membrane Filtration Process 301
10.2.8.1 Principle of the Membrane Filtration Process 301
10.2.8.2 Microfiltration 301
10.2.8.3 Ultrafiltration 302
10.2.8.4 Nanofiltration 303
10.2.8.5 Reverse Osmosis 303
10.2.8.6 Challenges and Future Scope of the Membrane Filtration Process 303
10.3 Novel-Thermal Preservation Technique 303
10.3.1 Ohmic Heating Treatment 303
10.3.1.1 Application of OH Treatment 304
10.3.1.2 Challenges and Future Scope of OH Treatment 311
10.3.2 Microwave Heating 311
10.3.2.1 Principle of MW Heating 311
10.3.2.2 Applications of MW Heating 312
10.3.2.3 Challenges and Future Scope of MW Heating 312
10.3.3 Infrared Heating (IRH) 312
10.3.3.1 Application of IRH 313
10.3.3.2 Challenges and Future Scope of IRH 313
10.3.4 Radio Frequency Heating 313
10.3.4.1 Principle of RF Heating 314
10.3.4.2 Factor Influencing of RF Heating 314
10.3.4.3 Challenges and Future Scope of RF Heating 314
10.4 Other Alternate Preservation Techniques 315
10.4.1 Freezing 315
10.4.1.1 Challenges and Future Scope of Freezing 316
10.4.2 Dehydration 316
10.4.3 Frying 317
10.4.4 Chilling 318
10.4.5 Extrusion 318
10.4.6 Three-Dimensional (3-D) Printing 319
10.4.6.1 Principle of 3-D Printing 319
10.4.6.2 Factor Influencing 3-D Printing 319
10.4.7 Blanching 320
10.5 Hurdle Technology for Preservation of Food 320
10.6 Irradiation Process for Preservation of Food 321
10.6.1 Electron Beam 327
10.6.2 X-Radiation (X-Ray) 327
10.6.3 Gamma Rays 327
10.7 Food Additives for the Preservation of Food 328
10.7.1 Natural Additives 328
10.7.2 Synthetic Additives 328
10.7.3 Challenges and Future Scope of Additives 331
10.8 Conclusion 332
References 332
11 Green Solvents for Food Processing Applications 341
A Surendra Babu, A Sangeetha and R Jaganmohan
11.1 Introduction 342
11.2 Green Solvents 344
11.2.1 Water as Green Solvent 345
11.2.2 Subcritical Water Extraction 346
11.2.3 Supercritical Fluids as Green Solvent 346
11.2.4 Gas Expanded Liquids as Green Solvent 347
11.2.5 Ionic Liquids as Green Solvent 348
11.2.5.1 Classification of Ionic Liquids 348
11.2.6 Solvents Derived From Biomass as Green Solvent 349
11.2.7 Deep Eutectic Solvents as Green Solvents 352
11.3 Synthesis of NADES 353
11.3.1 NADES for Extraction of Phenolic Compounds 355
11.3.2 NADES for Extraction of Flavonoids 360
11.3.3 NADES for Extraction of Other Polar Compounds 364
11.3.3.1 Ferulic Acid Extraction From Ligusticum Chuanxiong Hort and NADES 364
11.3.4 NADES for Extraction of Food Samples 364
11.3.4.1 Extraction of Vanillin With NADES 364
11.3.4.2 Extraction of Anthocyanins With NADES 364
11.3.4.3 Extraction of Phenolic Compounds With NADES 364
11.3.5 General Considerations Using NADES as Extraction Solvents 365
11.4 Conclusion and Future Trends 366
References 366
12 Technological Advancement in Food Additives and Preservatives 375
Shikha Pandhi, Arvind Kumar and Akansha Gupta
Abbreviations 376
12.1 Introduction 377
12.2 Food Additives and Preservatives 378
12.2.1 Classes of Food Additives 379
12.2.2 Significance in Food Processing and Preservation 381
12.2.3 Mechanism of Action of Food Preservatives 381
12.3 Regulatory Aspects of Food Additives and Preservatives 382
12.3.1 Generally Recognized as Safe 383
12.3.2 FSSAI Regulations on Permissible Limits of Food Additives 383
12.4 Health Concerns of Conventional Food Additives 383
12.5 Technological Advancements in Food Additives and Preservatives 384
12.5.1 Novel Food Additives 384
12.5.1.1 Essential Oils/Phytochemicals 385
12.5.1.2 Metallic Nanoparticles as Antimicrobial (Green Route) 386
12.6 Novel Technological Approaches for Enhanced Functionality 386
12.6.1 Nanoencapsulation 386
12.6.1.1 Fundamentals and Techniques 387
12.6.1.2 Types of Encapsulating Material 388
12.7 Methods for Food Additives Determination 389
12.7.1 Analytical Methods 389
12.7.1.1 Spectroscopy Techniques 389
12.7.1.2 Chromatographic Techniques 390
12.7.1.3 Electroanalytical Techniques 391
12.8 Future Prospects 391
12.9 Conclusion 392
References 393
13 Sensors for Non-Destructive Quality Evaluation of Food 397
Krishna Gopalakrishnan, Arun Sharma, Neela Emanuel, Pramod K Prabhakar and Ritesh Kumar
13.1 Introduction 398
13.2 Different Types of Non-Destructive Methods 400
13.2.1 Mechanical Method 400
13.2.1.1 Mechanical Thumb Method 400
13.2.1.2 Sinclair IQTM-Firmness Tester (SIQ-FT) 401
13.2.1.3 Laser Air-Puff 401
13.2.2 Chemical Method 401
13.2.2.1 Electronic Nose 401
13.2.3 Electromagnetic Method 404
13.2.3.1 Nuclear Magnetic Resonance (NMR) 404
13.2.3.2 Magnetic Resonance Imaging 406
13.2.4 Optical Method 408
13.2.4.1 NIR Spectroscopy 408
13.2.4.2 Image Analysis Techniques 410
13.2.4.3 Time-Resolved Reflectance Spectrometry 415
13.2.5 Dynamic Method 418
13.2.5.1 X-Rays 418
13.2.5.2 Computed Tomography 419
13.2.5.3 Ultrasonic 420
13.2.5.4 Acoustic Techniques 421
13.2.6 Sensor Fusion 423
13.3 Non-Destructive Quality Testing in Various Food Commodities 425
13.3.1 Staple Foods 425
13.3.1.1 Sensory Aspect 426
13.3.1.2 Adulteration Aspects 427
13.3.1.3 Chemical Aspects 427
13.3.2 Fruits 427
13.3.2.1 Fruit Quality Inspection Using Electronic Nose 429
13.3.2.2 Fruit Quality Inspection Using UV-VIS-NIR Spectroscopy 429
13.3.2.3 Fruit Quality Inspection Using Ultrasound Sensing Technique 430
13.3.2.4 Fruit Quality Inspection Using Machine Vision Sensing Technique 430
13.3.2.5 Fruit Quality Inspection Using Acoustic Impulse Technique 431
13.3.3 Vegetables 431
13.3.3.1 Spectroscopic Techniques 431
13.3.3.2 Sound Waves Techniques 434
13.3.3.3 Imaging Analysis Techniques 435
13.4 Conclusion 436
References 437
Index 451
1 Food Chemistry: Role of Additives, Preservatives, and Adulteration 1
Mousumi Sen
1.1 Introduction 2
1.2 Categories of Food Colors 2
1.3 Natural Colors Are Best Over Artificial Colors 3
1.4 Classification of Food Colorants 3
1.4.1 Natural Colorants 3
1.4.2 Synthetic Colorants 7
1.4.2.1 Water Soluble Synthetic Colors 7
1.4.2.2 Fat Soluble Synthetic Colorants 8
1.4.2.3 Lake Colorants 8
1.5 Classification of Food Additives 9
1.5.1 Why Food Colors Are Preferred 12
1.5.2 E-Numbering 13
1.6 Food Spoilage and Preservation 14
1.6.1 Causes of Spoilage 14
1.6.2 Principle of Food Preservation 15
1.7 Preservatives 15
1.7.1 Factors Affecting Preservative Efficiency 15
1.7.1.1 Interaction With Formulation Components 15
1.7.1.2 Properties of Preservatives 16
1.7.1.3 Effect of Containers 16
1.7.1.4 Types of Micro-Organisms 16
1.7.1.5 Influence of pH 16
1.7.2 Factors Affecting Chemical Preservation 17
1.7.3 Classification of Chemical Preservatives 17
1.7.4 Types of Chemical Preservatives 17
1.7.5 Natural Chemical Preservatives 18
1.7.6 Methods of Food Preservation 19
1.8 Antioxidants 20
1.9 Oils and Spices 21
1.10 Introduction to Hurdle Technology 22
1 Advantages of Food Additives and Preservatives 23
2 Disadvantages of Food Additives and Preservatives 23
3 Effects of Food Additives and Food Preservatives 24
4 Safety of Food Additives and Preservatives 25
1.11 Adulteration 26
1 History of Food Adulteration 27
2 Types of Food Adulteration 27
2.1 Intentional Adulteration 27
2.2 Incidental Adulteration 28
2.3 Metallic Adulteration 28
3 A Food Is Considered Adulterated if It Has the Following Factors 28
4 Effects of Adulterated Food on Human Health 28
5 Reasons for Food Adulteration 29
6 Methods of Food Adulteration 29
7 Trends of Food Adulteration in Developing Countries 30
1.12 Food Safety and Standards Act 30
1 Few Steps to Avoid Adulteration 32
2 Detection Methods of Adulteration 33
3 Technique to Check Food Adulteration 33
1.13 Conclusion 33
References 35
2 Additives and Preservatives Used in Food Processing and Preservation, and Their Health Implication 43
Sunita Adhikari (Nee Pramanik)
Abbreviations 44
2.1 Introduction 44
2.2 Merits and Demerits of Food Additives and Preservatives 47
2.2.1 Merits of Food Additives and Preservatives 47
2.2.2 Demerits of Food Additives and Preservatives 47
2.3 Types of Food Additives and Preservatives 48
2.3.1 Preservatives 48
2.3.2 Nutritional Additives 51
2.3.3 Flavoring Agent 51
2.3.4 Coloring Agent 51
2.3.5 Texturizing Agent 53
2.3.6 Miscellaneous Additives 54
2.3.6.1 Acidity Regulator 54
2.3.6.2 Anti-Caking Agent 54
2.3.6.3 Antifoaming Agent 54
2.3.6.4 Flour Treatment Agents 54
2.3.6.5 Fat Replacers 56
2.3.6.6 Sweeteners 56
2.3.6.7 Leavening Agent 61
2.3.6.8 Firming Agent 62
2.3.6.9 Glazing Agent 62
2.3.6.10 Humectant 62
2.3.6.11 Sequestering Agent 62
2.3.6.12 Gelling Agent 63
2.3.6.13 Propellants 63
2.3.6.14 Foaming Agent 63
2.3.6.15 Seasoning 63
2.3.6.16 Curing Agents 64
2.3.6.17 Probiotics 64
2.3.6.18 Other Food Additives 65
2.3.6.19 Indirect Food Additives 65
2.4 Health Effect of Food Additives and Preservatives 66
2.5 Conclusion 70
References 71
3 Role of Packaging in Food Processing 73
Bhasha Sharma, Susmita dey Sadhu, Rajni Chopra and Meenakshi Garg
3.1 Introduction 74
3.2 State-of-the-Art 76
3.3 Raw Materials Used in Food Packaging 78
3.3.1 Metals 79
3.3.2 Glass 80
3.3.3 Plastics 80
3.3.4 Paper and Cardboard 80
3.4 Packaging Footprints on Quality, Shelf Life, and Safety of Food 81
3.5 Prolegomenon on Active and Smart Packaging Systems 81
3.5.1 Active Packaging 82
3.5.2 Intelligent Packaging System 83
3.6 Aseptic Packaging in Food Processing 84
3.7 The Paradigm in Strategies for Improvement of Food Packaging 85
3.7.1 Bequest of Packaging Into the Cycle of Food Chain Sustainability 85
3.7.2 Selection of Materials With the Objective of Recyclability 86
3.7.3 Escalating Protective Role of Packaging 87
3.7.4 How Biodegradable Polymers can Mitigate the Plight of Packaging in Food Processing 88
3.8 Integration of Nanotechnology to Ameliorate Food Packaging 89
3.9 Life Cycle Assessment (LCA) 90
3.10 Deciphering the Challenges for Sustainable Food Packaging 91
3.11 Conclusion and the Way Forward 92
Acknowledgement 92
References 92
4 Laws Impacting Chemicals Added to Food 97
Preeti Khanna, Rajni Chopra and Meenakshi Garg
4.1 Introduction 98
4.2 Functions of Food Additives 98
4.2.1 Sustain or Enhance the Shelf Life and Freshness of a Product 99
4.2.2 Sustain or Enhance the Nutritional Quality of a Product 99
4.2.3 Improve the Aesthetic Appeal and Sensory Attributes of a Product 99
4.3 Classification of Food Additives 99
4.3.1 Classification Based on Functionality 99
4.3.1.1 Flavoring Agents 100
4.3.1.2 Enzyme Preparations 100
4.3.1.3 Other Additives 100
4.4 Classification Based on Primary and Secondary Technological Roles-Direct and Indirect Additives 101
4.5 Evaluating the Health Risk of Food Additives 101
4.6 International Regulations for the Efficacy of Food Additives 102
4.7 International Laws 102
4.7.1 US Food and Drug Administration 102
4.8 Indian Regulations-Food Safety and Standards Authority of India (FSSAI), Additives Regulations (Regulation 3.1) 103
4.9 Safety Assessment: Redbook's Principles of Safety Evaluation 105
4.10 Levels of Concern for Direct Food Additives 106
4.11 Threshold Regulation Exemption for Indirect Food Additives 107
4.12 Estimated Daily Intakes 108
4.13 Human Data and Clinical Studies 109
4.14 GRAS Substances 109
4.15 European Union Legislation 110
4.16 Categorization of Food Additives 110
1 Additives Can Be Used for the Following Purposes 110
4.17 Safety Assessment of Food Additives 111
4.18 Safety Evaluation Process and Authorization 112
4.19 Use of Food Additives in Food Products 113
1 Traditional Foods 113
2 Restricted Provisions 114
4.20 Labeling Regulations and Guidelines 114
4.21 Conclusion 114
References 114
5 Detection of Food Adulterants in Different Foodstuff 117
Aditi Negi, P Lakshmi Praba K., R Meenatchi and Akash Pare
5.1 Introduction 118
5.2 Types of Adulteration 118
5.3 Impact of Adulteration on Health 120
5.4 Approaches for Adulterant Authentication in Food Materials 121
5.5 Physical Authentication Techniques 122
5.6 Application of Biochemical and Analytical Methods in Adulterant Authentication 124
5.6.1 Adulterant Authentication Through HPLC 124
5.6.2 Adulterant Authentication Through GCMS 127
5.6.3 Adulterant Authentication Through Spectroscopic Method 127
5.6.4 Adulterant Authentication Through Ambient Mass Spectroscopy Techniques 128
5.6.5 Adulterant Authentication Through Nuclear Magnetic Resonance Technique 128
5.7 Adulterant Identification by Molecular Techniques 136
5.7.1 Polymerase Chain Reaction-Based Techniques for Adulterant Identification 137
5.7.2 Application of Real-Time PCR in Adulterant Authentication 142
5.7.3 Isothermal Amplification Methods for Adulterant Identification 142
5.7.4 Sequencing and Hybridization-Based Methods in Adulterant Identification 147
5.8 Limitation in Use of Molecular-Based Methods for Adulterant Authentication 148
5.9 Conclusion 152
References 152
6 Trends of Food Adulteration in Developing Countries and Its Remedies 165
Satyam Chachan, Anand Kishore, Khushbu Kumari and Arun Sharma
6.1 Introduction 166
6.2 Food Fraud in Developing Countries 166
6.2.1 Impact of Adulteration 168
6.3 Classification of Food Adulteration 169
6.3.1 Intentional Adulteration 171
6.4 Common Food Adulterants 172
6.5 Adulteration Remedy Strategies 177
6.5.1 Government and Regulatory Agency Initiative 177
6.5.2 Loopholes in Existing Method of Eliminating Adulteration 179
6.5.3 Process and Product Verification 181
6.5.4 Higher Levels of Transparency/Traceability in Supply Chain 182
6.5.5 Use of Novel Technology 182
6.5.6 Training 183
6.5.7 Awareness 183
6.6 Conclusion 185
References 186
7 Food Adulteration and Its Impacts on Our Health/Balanced Nutrition 189
Suka Thangaraju, Nikitha Modupalli and Venkatachalapathy Natarajan
7.1 Introduction 190
7.2 Types of Adulteration 192
7.2.1 Intentional Adulteration 192
7.2.2 Incidental Adulteration 193
7.2.3 Other Types of Adulteration 193
7.2.3.1 Natural Contamination 193
7.2.3.2 Metallic Contamination 193
7.2.3.3 Microbial Contamination 194
7.2.3.4 Adulteration in Organic Foods 195
7.2.3.5 Adulteration During Irradiation of Foods 195
7.2.3.6 Genetically Modified Foods 195
7.3 Adulteration in Foods 196
7.3.1 Global Food Environment 197
7.4 Effects of Food Adulteration 201
7.4.1 Health Effects 201
7.4.2 Balanced Nutrition 205
7.5 Measures to Mitigate Food Adulteration 206
7.5.1 Producer's or Manufacturer's End 206
7.5.2 Consumer's End 206
7.5.3 Government and Regulatory Agencies 207
References 209
8 Natural Food Toxins as Anti-Nutritional Factors in Plants and Their Reduction Strategies 217
Naman Kaur, Aparna Agarwal, Manisha Sabharwal and Nidhi Jaiswal
Abbreviations 218
8.1 Introduction 218
8.2 Anti-Nutritional Factor 221
8.2.1 Tannins 221
8.2.1.1 Types 222
8.2.1.2 Adverse Effects 222
8.2.2 Saponins 223
8.2.2.1 Saponins 223
8.2.2.2 Adverse Effects 224
8.2.3 Lectins and Hemagglutinin 225
8.2.3.1 Adverse Effects 226
8.2.4 Alkaloids 227
8.2.4.1 Adverse Health Effects 227
8.2.5 Oxalates 228
8.2.5.1 Adverse Effects 229
8.2.6 Cyanogenic Glycosides 230
8.2.6.1 Adverse Effects 231
8.2.7 Goitrogens 231
8.2.7.1 Adverse Effects 232
8.3 Methods to Reduce Levels of Anti-Nutritional Factors in Foods 234
8.3.1 Soaking 234
8.3.2 Fermentation 235
8.3.3 Germination 236
8.3.4 Milling 237
8.3.5 Extrusion 237
8.3.6 Heating-Autoclaving (Wet Heating) and Roasting (Dry Heating) 238
8.3.7 Gamma Radiation 239
8.3.8 Genomic Technology 239
8.4 Conclusion 240
References 240
9 Feeding the Future-Challenges and Limitations 249
Baishakhi De and Tridib Kumar Goswami
9.1 Introduction 250
9.2 Early Life Nutrition and Healthy Future 252
9.2.1 Choice of Food and "Nutrition Transition" 253
9.3 Challenges and Opportunities in Developing the Future Food Systems 255
9.4 Sustainable Diet for the Future 257
9.5 Research Trends and Green Food Technologies 259
9.5.1 Green Technologies in Food Processing 260
9.5.2 Nanotechnology in Food Processing and Food Safety 262
9.5.3 CRISPR-Based Technologies 262
9.5.4 Future Directives 265
9.5.4.1 3D Food Printing and Mass Customization of Diet 266
9.6 Regulations and Trade 270
9.7 Conclusion 270
References 271
10 Alternate Food Preservation Technology 275
Pratik S Gaikwad, Chayanika Sarma, Aditi Negi and Akash Pare
10.1 Introduction 276
10.2 Non-Thermal Preservation Technique 277
10.2.1 Packaging Technology 277
10.2.1.1 Challenges and Future Scope of MAP Processing 282
10.2.2 Ozone (O3) Treatment 282
10.2.2.1 Properties of O3 291
10.2.2.2 Principle of O3 Generation 291
10.2.2.3 Challenges and Future Scope of O3 Processing 292
10.2.3 High Hydrostatic Pressure Treatment 292
10.2.3.1 Principles of HPP Treatment 294
10.2.3.2 HPP Time 294
10.2.3.3 Challenges and Future Scope of HPP Treatment 295
10.2.4 Ultrasound Treatment 295
10.2.4.1 Principle of Ultrasound Treatment 296
10.2.4.2 Challenges and Future Scope of Ultrasound Treatment 296
10.2.5 Pulsed Electric Field Treatment 296
10.2.5.1 Principle of PEF Treatment 297
10.2.5.2 Challenges and Future Scope of PEF Treatment 298
10.2.6 Cold Plasma Treatment 298
10.2.6.1 Generation of CP Treatment 298
10.2.6.2 Challenges and Future Scope of CP 300
10.2.7 Oscillating Magnetic Field 300
10.2.7.1 Challenges and Future Scope of OMF 301
10.2.8 Membrane Filtration Process 301
10.2.8.1 Principle of the Membrane Filtration Process 301
10.2.8.2 Microfiltration 301
10.2.8.3 Ultrafiltration 302
10.2.8.4 Nanofiltration 303
10.2.8.5 Reverse Osmosis 303
10.2.8.6 Challenges and Future Scope of the Membrane Filtration Process 303
10.3 Novel-Thermal Preservation Technique 303
10.3.1 Ohmic Heating Treatment 303
10.3.1.1 Application of OH Treatment 304
10.3.1.2 Challenges and Future Scope of OH Treatment 311
10.3.2 Microwave Heating 311
10.3.2.1 Principle of MW Heating 311
10.3.2.2 Applications of MW Heating 312
10.3.2.3 Challenges and Future Scope of MW Heating 312
10.3.3 Infrared Heating (IRH) 312
10.3.3.1 Application of IRH 313
10.3.3.2 Challenges and Future Scope of IRH 313
10.3.4 Radio Frequency Heating 313
10.3.4.1 Principle of RF Heating 314
10.3.4.2 Factor Influencing of RF Heating 314
10.3.4.3 Challenges and Future Scope of RF Heating 314
10.4 Other Alternate Preservation Techniques 315
10.4.1 Freezing 315
10.4.1.1 Challenges and Future Scope of Freezing 316
10.4.2 Dehydration 316
10.4.3 Frying 317
10.4.4 Chilling 318
10.4.5 Extrusion 318
10.4.6 Three-Dimensional (3-D) Printing 319
10.4.6.1 Principle of 3-D Printing 319
10.4.6.2 Factor Influencing 3-D Printing 319
10.4.7 Blanching 320
10.5 Hurdle Technology for Preservation of Food 320
10.6 Irradiation Process for Preservation of Food 321
10.6.1 Electron Beam 327
10.6.2 X-Radiation (X-Ray) 327
10.6.3 Gamma Rays 327
10.7 Food Additives for the Preservation of Food 328
10.7.1 Natural Additives 328
10.7.2 Synthetic Additives 328
10.7.3 Challenges and Future Scope of Additives 331
10.8 Conclusion 332
References 332
11 Green Solvents for Food Processing Applications 341
A Surendra Babu, A Sangeetha and R Jaganmohan
11.1 Introduction 342
11.2 Green Solvents 344
11.2.1 Water as Green Solvent 345
11.2.2 Subcritical Water Extraction 346
11.2.3 Supercritical Fluids as Green Solvent 346
11.2.4 Gas Expanded Liquids as Green Solvent 347
11.2.5 Ionic Liquids as Green Solvent 348
11.2.5.1 Classification of Ionic Liquids 348
11.2.6 Solvents Derived From Biomass as Green Solvent 349
11.2.7 Deep Eutectic Solvents as Green Solvents 352
11.3 Synthesis of NADES 353
11.3.1 NADES for Extraction of Phenolic Compounds 355
11.3.2 NADES for Extraction of Flavonoids 360
11.3.3 NADES for Extraction of Other Polar Compounds 364
11.3.3.1 Ferulic Acid Extraction From Ligusticum Chuanxiong Hort and NADES 364
11.3.4 NADES for Extraction of Food Samples 364
11.3.4.1 Extraction of Vanillin With NADES 364
11.3.4.2 Extraction of Anthocyanins With NADES 364
11.3.4.3 Extraction of Phenolic Compounds With NADES 364
11.3.5 General Considerations Using NADES as Extraction Solvents 365
11.4 Conclusion and Future Trends 366
References 366
12 Technological Advancement in Food Additives and Preservatives 375
Shikha Pandhi, Arvind Kumar and Akansha Gupta
Abbreviations 376
12.1 Introduction 377
12.2 Food Additives and Preservatives 378
12.2.1 Classes of Food Additives 379
12.2.2 Significance in Food Processing and Preservation 381
12.2.3 Mechanism of Action of Food Preservatives 381
12.3 Regulatory Aspects of Food Additives and Preservatives 382
12.3.1 Generally Recognized as Safe 383
12.3.2 FSSAI Regulations on Permissible Limits of Food Additives 383
12.4 Health Concerns of Conventional Food Additives 383
12.5 Technological Advancements in Food Additives and Preservatives 384
12.5.1 Novel Food Additives 384
12.5.1.1 Essential Oils/Phytochemicals 385
12.5.1.2 Metallic Nanoparticles as Antimicrobial (Green Route) 386
12.6 Novel Technological Approaches for Enhanced Functionality 386
12.6.1 Nanoencapsulation 386
12.6.1.1 Fundamentals and Techniques 387
12.6.1.2 Types of Encapsulating Material 388
12.7 Methods for Food Additives Determination 389
12.7.1 Analytical Methods 389
12.7.1.1 Spectroscopy Techniques 389
12.7.1.2 Chromatographic Techniques 390
12.7.1.3 Electroanalytical Techniques 391
12.8 Future Prospects 391
12.9 Conclusion 392
References 393
13 Sensors for Non-Destructive Quality Evaluation of Food 397
Krishna Gopalakrishnan, Arun Sharma, Neela Emanuel, Pramod K Prabhakar and Ritesh Kumar
13.1 Introduction 398
13.2 Different Types of Non-Destructive Methods 400
13.2.1 Mechanical Method 400
13.2.1.1 Mechanical Thumb Method 400
13.2.1.2 Sinclair IQTM-Firmness Tester (SIQ-FT) 401
13.2.1.3 Laser Air-Puff 401
13.2.2 Chemical Method 401
13.2.2.1 Electronic Nose 401
13.2.3 Electromagnetic Method 404
13.2.3.1 Nuclear Magnetic Resonance (NMR) 404
13.2.3.2 Magnetic Resonance Imaging 406
13.2.4 Optical Method 408
13.2.4.1 NIR Spectroscopy 408
13.2.4.2 Image Analysis Techniques 410
13.2.4.3 Time-Resolved Reflectance Spectrometry 415
13.2.5 Dynamic Method 418
13.2.5.1 X-Rays 418
13.2.5.2 Computed Tomography 419
13.2.5.3 Ultrasonic 420
13.2.5.4 Acoustic Techniques 421
13.2.6 Sensor Fusion 423
13.3 Non-Destructive Quality Testing in Various Food Commodities 425
13.3.1 Staple Foods 425
13.3.1.1 Sensory Aspect 426
13.3.1.2 Adulteration Aspects 427
13.3.1.3 Chemical Aspects 427
13.3.2 Fruits 427
13.3.2.1 Fruit Quality Inspection Using Electronic Nose 429
13.3.2.2 Fruit Quality Inspection Using UV-VIS-NIR Spectroscopy 429
13.3.2.3 Fruit Quality Inspection Using Ultrasound Sensing Technique 430
13.3.2.4 Fruit Quality Inspection Using Machine Vision Sensing Technique 430
13.3.2.5 Fruit Quality Inspection Using Acoustic Impulse Technique 431
13.3.3 Vegetables 431
13.3.3.1 Spectroscopic Techniques 431
13.3.3.2 Sound Waves Techniques 434
13.3.3.3 Imaging Analysis Techniques 435
13.4 Conclusion 436
References 437
Index 451
Este título pertence ao(s) assunto(s) indicados(s). Para ver outros títulos clique no assunto desejado.
Food chemistry; role of additives; preservatives and adulteration; processing and preservation; packaging in food processing; laws impacting chemicals; adulterants in different foodstuff; impacts on our health/balance nutrition; food toxicity and forensics; feeding the future; alternative preservation technology; green solvents; technological advancement; sensors; non-destructive quality evaluation
