Proceedings of the 42nd International Conference on Advanced Ceramics and Composites, Ceramic Engineering and Science Proceedings, Issue 2

Introduction ix MECHANICAL BEHAVIOR AND PERFORMANCE OF CERAMICS AND COMPOSITES Fracture Toughness of Modern and Ancient Glasses and Glass Ceramics as Measured by the SEPB Method 3 G. D. Quinn, J. J. Swab, and P. Patel Erosion Behavior in a Gas Turbine Grade Oxide/Oxide Ceramic Matrix Composite 15 M. J. Presby, N. Kedir, L. J. Sanchez, C. Gong, D. C. Faucett, S. R. Choi,and G. N. Morscher Applying ASTM International C1421 to Glasses and Optical Ceramics 27 Jonathan A. Salem and Michael G. Jenkins Effect of Control Mode and Test Rate on the Measured Fracture Toughness of Advanced Ceramics 41 Bronson D. Hausmann and Jonathan A. Salem In-Situ Study on SiC-Si Interfacial Bonding Strength of Reaction Bonded SiC/Si Composites 51 C. Hsu, Y. Zhang, P. Karandikar, F. Deng, and C. Ni Evaluation of New Technique to Estimate Yield Stress in Brittle Materials via Spherical Indentation Testing 61 B. L. Hackett, A. A. Wereszczak, and G. M. Pharr ADVANCED CERAMIC COATINGS FOR STRUCTURAL,ENVIRONMENTAL, AND FUNCTIONAL APPLICATIONS Oxidation Study of an Ultra High Temperature Ceramic Coating Based on HFSiCN 75 Dagny Sacksteder, Deborah L. Waters, and Dongming Zhu 15TH INTERNATIONAL SYMPOSIUM ON SOLID OXIDE FUEL CELLS (SOFC): MATERIALS, SCIENCE, AND TECHNOLOGY Investigation of (La1-X,CaX)(Ni0.25Fe0.25Cr0.25Co0.25)O3 for Solid Oxide Fuel Cells Cathode Materials 87 Sai Ram Gajjala, Zhezhen Fu, and Rasit Koc Development of Cathode Contacting for SOFC Stacks 99 K. Sick, N. Grigorev, N.H. Menzler, and O. Guillon Microstruct ure Modification in the Electrodes to Enhance Performance of the Anode-Supported Solid Oxide Fuel Cell 113 Chun-Yen Yeh, Tai-Nan Lin, Hong-Yi Kuo, Ming-Wei Liao, Yu-Ming Chen,Wei-Xin Kao, Ruey-Yi Lee, and Sheng-Wei Lee Preparation and Characterization of BaY0.2Ce0.7Zr0.1O3- Ceramic Powder by Glycine Nitrate Combustion (GNC) Process for Proton-conducting Solid Oxide Fuel Cell 123 Wei-Xin Kao, Tai-Nan Lin, Ming-Wei Liao, Hong-Yi Kuo, Chun-Yen Yeh, Yu-Ming Chen, and Ruey-yi Lee Effects of Composite Ratio of Vermiculite/Talc Seal Material on Gas Leak Properties 131 Jie Xu and Seiichi Suda Performance Test for Anode-Supported and Metal-Supported Solid Oxide Electrolysis Cell under Different Current Densities 139 Szu-Han Wu, Jing-Kai Lin, Wei-Hong Shiu, Chien-Kuo Liu, Tai-Nan Lin, Ruey-Yi Lee, Huan-Chan Ting, Hung-Hsiang Lin, and Yung-Neng Cheng Protective Coatings for SOFC Metallic Interconnects 149 Mark K. King Jr. and Manoj K. Mahapatra Development of Portable Solid Oxide Fuel Cell System Driven by Hydrocarbon and Alcohol Fuels 159 Hirofumi Sumi, Hiroyuki Shimada, Toshiaki Yamaguchi, Yoshinobu Fujishiro and Masanobu Awano Phase Field Modelling of Microstructural Changes in Ni/YSZ Solid Oxide Electrolysis Cell Electrodes 165 M. Trini, S. De Angelis, P. S. Jorgensen, A. Hauch, M. Chen and P. V. Hendriksen Development of Fe/Cr Alloy-Supported Solid Oxide Fuel Cell by Plasma Technique 177 Sheng-Fu Yang , Chun-Huang Tsai, Chun-Liang Chang, Cheng-Yun Fu,Ruey-Yi Lee, Chien-Kuo Liu, and Huei-Long Lee ARMOR CERAMICS: CHALLENGES AND NEW DEVELOPMENTS Effects of Hardness and Toughness of Ceramic in a Ceramic Armour Module against Long Rod Impacts 187 W. L. Goh, B. Luo, Z. Zeng, J. Yuan, and K. W. Ng Mesoscale Simulations of Boron Carbide Subjected to Shockwave Propagation 199 Brady Aydelotte, Jennifer Sietins, Clara Mock, Carli Moorehead and Timothy Holmquist First Principles Model of Yttrium Adsorption on Boron Suboxide (0001) Surface 205 J. Synowczynski-Dunn, K. Behler, J. C. LaSalvia, C. Marvel, and M. Harmer Generation of Polycrystalline Microstructures for the Discretization On-The-Fly of FE Models for Multi-Scale Simulations 213 S. Falco, N. Bombace, and N. Petrinic ADVANCED MATERIALS AND TECHNOLOGIES FOR DIRECT THERMAL ENERGY CONVERSION AND RECHARGEABLE ENERGY STORAGE The Tape-Casting and PAS Sintering of LLZO Ceramic Membrane Electrolyte 223 Fei Chen, Shiyu Cao, Xing Xiang, Dunjie Yang, Wenping Zha, Junyang Li, Qiang Shen, and Lianmeng Zhang 12TH INTERNATIONAL SYMBOSIUM ON ADVANCED PROCESSING & MANUFACTURING TECHNOLOGIES FOR STRUCTURAL MULTIFUNCTIONAL TECHNOLOGIES FOR STRUCTURAL & MULTIFUNCTIONAL MATERIALS AND SYSTEMS Thermal Expansion Coefficient Controlled Cu-ZrW2-xMoxO8 Cermet Materia l Prepared using Spark Plasma Sintering 233 Hui Wei, Midori Oe, Ryo Inoue, Akihisa Aimi, Kenjiro Fujimoto, and Keishi Nishio Influences of Laser Condition and Slit Shape on Joinability of (Zircaloy-SiC/SiC Composite Tube Joint 241 Hisashi Serizawa, Yuji Sato, Masahiro Tsukamoto, Hirotaka Motoki, Yuuki Asakura, Joon-Soo Park, Akira Kohyama, Naofumi Nakazato,and Hirotatsu Kishimoto Electroconductive Oxide Ceramics with Graphene-Encapsulated Fillers 251 I. Hussainova, M. Drozdova, R. Ivanov, S. Kale, and I. Jasiuk Introduction ix MECHANICAL BEHAVIOR AND PERFORMANCE OF CERAMICS AND COMPOSITES Fracture Toughness of Modern and Ancient Glasses and Glass Ceramics as Measured by the SEPB Method 3 G. D. Quinn, J. J. Swab, and P. Patel Erosion Behavior in a Gas Turbine Grade Oxide/Oxide Ceramic Matrix Composite 15 M. J. Presby, N. Kedir, L. J. Sanchez, C. Gong, D. C. Faucett, S. R. Choi,and G. N. Morscher Applying ASTM International C1421 to Glasses and Optical Ceramics 27 Jonathan A. Salem and Michael G. Jenkins Effect of Control Mode and Test Rate on the Measured Fracture Toughness of Advanced Ceramics 41 Bronson D. Hausmann and Jonathan A. Salem In-Situ Study on SiC-Si Interfacial Bonding Strength of Reaction Bonded SiC/Si Composites 51 C. Hsu, Y. Zhang, P. Karandikar, F. Deng, and C. Ni Evaluation of New Technique to Estimate Yield Stress in Brittle Materials via Spherical Indentation Testing 61 B. L. Hackett, A. A. Wereszczak, and G. M. Pharr ADVANCED CERAMIC COATINGS FOR STRUCTURAL,ENVIRONMENTAL, AND FUNCTIONAL APPLICATIONS Oxidation Study of an Ultra High Temperature Ceramic Coating Based on HFSiCN 75 Dagny Sacksteder, Deborah L. Waters, and Dongming Zhu 15TH INTERNATIONAL SYMPOSIUM ON SOLID OXIDE FUEL CELLS (SOFC): MATERIALS, SCIENCE, AND TECHNOLOGY Investigation of (La1-X,CaX)(Ni0.25Fe0.25Cr0.25Co0.25)O3 for Solid Oxide Fuel Cells Cathode Materials 87 Sai Ram Gajjala, Zhezhen Fu, and Rasit Koc Development of Cathode Contacting for SOFC Stacks 99 K. Sick, N. Grigorev, N.H. Menzler, and O. Guillon Microstruct ure Modification in the Electrodes to Enhance Performance of the Anode-Supported Solid Oxide Fuel Cell 113 Chun-Yen Yeh, Tai-Nan Lin, Hong-Yi Kuo, Ming-Wei Liao, Yu-Ming Chen,Wei-Xin Kao, Ruey-Yi Lee, and Sheng-Wei Lee Preparation and Characterization of BaY0.2Ce0.7Zr0.1O3- Ceramic Powder by Glycine Nitrate Combustion (GNC) Process for Proton-conducting Solid Oxide Fuel Cell 123 Wei-Xin Kao, Tai-Nan Lin, Ming-Wei Liao, Hong-Yi Kuo, Chun-Yen Yeh, Yu-Ming Chen, and Ruey-yi Lee Effects of Composite Ratio of Vermiculite/Talc Seal Material on Gas Leak Properties 131 Jie Xu and Seiichi Suda Performance Test for Anode-Supported and Metal-Supported Solid Oxide Electrolysis Cell under Different Current Densities 139 Szu-Han Wu, Jing-Kai Lin, Wei-Hong Shiu, Chien-Kuo Liu, Tai-Nan Lin, Ruey-Yi Lee, Huan-Chan Ting, Hung-Hsiang Lin, and Yung-Neng Cheng Protective Coatings for SOFC Metallic Interconnects 149 Mark K. King Jr. and Manoj K. Mahapatra Development of Portable Solid Oxide Fuel Cell System Driven by Hydrocarbon and Alcohol Fuels 159 Hirofumi Sumi, Hiroyuki Shimada, Toshiaki Yamaguchi, Yoshinobu Fujishiro and Masanobu Awano Phase Field Modelling of Microstructural Changes in Ni/YSZ Solid Oxide Electrolysis Cell Electrodes 165 M. Trini, S. De Angelis, P. S. Jorgensen, A. Hauch, M. Chen and P. V. Hendriksen Development of Fe/Cr Alloy-Supported Solid Oxide Fuel Cell by Plasma Technique 177 Sheng-Fu Yang , Chun-Huang Tsai, Chun-Liang Chang, Cheng-Yun Fu,Ruey-Yi Lee, Chien-Kuo Liu, and Huei-Long Lee ARMOR CERAMICS: CHALLENGES AND NEW DEVELOPMENTS Effects of Hardness and Toughness of Ceramic in a Ceramic Armour Module against Long Rod Impacts 187 W. L. Goh, B. Luo, Z. Zeng, J. Yuan, and K. W. Ng Mesoscale Simulations of Boron Carbide Subjected to Shockwave Propagation 199 Brady Aydelotte, Jennifer Sietins, Clara Mock, Carli Moorehead and Timothy Holmquist First Principles Model of Yttrium Adsorption on Boron Suboxide (0001) Surface 205 J. Synowczynski-Dunn, K. Behler, J. C. LaSalvia, C. Marvel, and M. Harmer Generation of Polycrystalline Microstructures for the Discretization On-The-Fly of FE Models for Multi-Scale Simulations 213 S. Falco, N. Bombace, and N. Petrinic ADVANCED MATERIALS AND TECHNOLOGIES FOR DIRECT THERMAL ENERGY CONVERSION AND RECHARGEABLE ENERGY STORAGE The Tape-Casting and PAS Sintering of LLZO Ceramic Membrane Electrolyte 223 Fei Chen, Shiyu Cao, Xing Xiang, Dunjie Yang, Wenping Zha, Junyang Li, Qiang Shen, and Lianmeng Zhang 12TH INTERNATIONAL SYMBOSIUM ON ADVANCED PROCESSING & MANUFACTURING TECHNOLOGIES FOR STRUCTURAL MULTIFUNCTIONAL TECHNOLOGIES FOR STRUCTURAL & MULTIFUNCTIONAL MATERIALS AND SYSTEMS Thermal Expansion Coefficient Controlled Cu-ZrW2-xMoxO8 Cermet Materia l Prepared using Spark Plasma Sintering 233 Hui Wei, Midori Oe, Ryo Inoue, Akihisa Aimi, Kenjiro Fujimoto, and Keishi Nishio Influences of Laser Condition and Slit Shape on Joinability of (Zircaloy-SiC/SiC Composite Tube Joint 241 Hisashi Serizawa, Yuji Sato, Masahiro Tsukamoto, Hirotaka Motoki, Yuuki Asakura, Joon-Soo Park, Akira Kohyama, Naofumi Nakazato,and Hirotatsu Kishimoto Electroconductive Oxide Ceramics with Graphene-Encapsulated Fillers 251 I. Hussainova, M. Drozdova, R. Ivanov, S. Kale, and I. Jasiuk

Este título pertence ao(s) assunto(s) indicados(s). Para ver outros títulos clique no assunto desejado.

• Ciência dos materiais