Practical Handbook of Grouting
-15%
portes grátis
Practical Handbook of Grouting
Soil, Rock, and Structures
Warner, James
John Wiley & Sons Inc
04/2004
720
Dura
Inglês
9780471463030
15 a 20 dias
1418
Descrição não disponível.
Preface. Acknowledgments.
Contributors Biographies.
PART I. THE PRESSURE GROUTING PROCESS.
Chapter 1. Introduction.
1.1 History Of Grouting.
1.2 Why Grout?
Chapter 2. Types of Grouting.
2.1 Permeation Grouting.
2.2 Compaction Grouting.
2.3 Fracture/Claquage Grouting.
2.4 Mixing/Jet Grouting.
2.5 Fill Grouting.
2.6 Vacuum Grouting.
Chapter 3. The Wide World of Grout Materials.
3.1 Cementitious Materials.
3.2 Admixtures for Cementitious Grouts.
3.3 Non Cementitious Grouts.
3.4 Material Selection.
3.5 Basic Material Properties.
Chapter 4. Grout Rheology.
4.1 Grout Consistency.
4.2 Material Behavior.
4.3 Other Rheological Properties.
Chapter 5. Cementitious Grout Materials.
5.1 Portland Cement.
5.3 Special Cements.
5.4 Supplementary Cementing Materials.
5.5 Blended Hydraulic Cements.
5.6 Ultrafine Cement.
5.7 Admixtures for Cementitious Grouts.
5.8 Fillers.
5.9 Blocking Agents.
Chapter 6. Cementitious Grout Mixtures.
6.1 Bleed Water.
6.2 Water to Cement Ratio.
6.3 Mix Design.
Chapter 7. Non-Cementitious Grouts.
7.1 Chemical Solution Grouts.
7.2 Chemical Solution Grouts for Strengthening.
7.3 Chemical Solution Grouts for Water Control.
7.4 Resinous Grouts.
7.5 Miscellaneous Grout Materials.
Chapter 8. Tests for Evaluation of Grouts and Grouted Masses.
8.1 Flow Cones.
8.2 Specific Gravity.
8.3 Evaluation of Bleed.
8.4 Pressure Filtration.
8.5 Slump.
8.6 Strength Tests.
Chapter 9. Injection Fundamentals.
9.1 Principals of Flow.
9.2 Effects of Grout Rheology.
9.3 Grout Penetration.
9.4 Injection Pressure.
9.5 Pumping Rate.
9.6 Pressure Behavior.
9.7 Vacuum.
Chapter 10. Grout Holes
10.1 Establishing the Holes.
10.2 Hole Drilling.
10.3 Hole Closure and Abandonment.
Chapter 11. Grouting in Soil.
11.1 Compaction Grouting.
11.2 Permeation Grouting in Soil.
11.3 Fracture (Claquage) Grouting.
11.4 Jet Grouting (Mixing).
Chapter 12. Grouting in Rock.
12.1 Know The Rock Properties.
12.2 Grouting For Water Control.
12.3 Grouting Rock For Strengthening.
12.4 Grout Holes.
12.5 The Grout Mix.
12.6 Injection Considerations.
Chapter 13. Grouting in Concrete and Masonry Structures.
13.1 Filling Structural Cavities and Joints.
13.2 Filling Cracks and Joints.
13.3 Contact Grouting.
13.4 Post-Tension Tendon Grouting.
13.5 Grouting Bedplates.
13.6 Abandoning Conduits and Tanks.
13.7 Filling Annular Space/Backfilling.
13.8 Filling Fabric Forms.
13.9 Preplaced Aggregate Concrete.
13.10 An Unusual Structural Application.
Chapter 14. Groutjacking.
14.1 Slabjacking.
14.2 Groutjacking Structures.
Chapter 15. Grouting in Pipes and Conduits.
15.1 Access Restrictions.
15.2 Safety Issues.
15.3 Small Inaccessable Conduits.
15.4 Worker Accessible Conduits.
Chapter 16. Grouting of Underground Structures.
16.1 Geotechnical and Structural Grouting.
16.2 Excavation Methods.
16.3 Lining Systems.
16.4 Conclusions.
Chapter 17. Leakage Control in Structures.
17.1 The Leakage Path.
17.2 Grout Holes/Injection Ports.
17.3 The Grout Material.
17.4 Grout Injection and Monitoring.
17.5 Some Examples of Use.
Chapter 18. Grouting in Extreme Environments.
18.1 Temperature Effects on Grout.
18.2 Extreme Chemical Exposures.
18.3 Provisions for Temperature Extremes.
Chapter 19. The Use of Explosives in Grouting.
19.1 Introduction.
19.2 Principals of Explosives Use.
19.3 Formation of Expanded Head Piles and Ground Anchors.
19.4 Clearing Obstructions to Grout Flow.
19.5 Accessing Subsurfac Fissures and Voids.
19.6 In-Place Perforation Of Injection Casing.
Chapter 20. Emergency Response Grouting.
20.1 Before Injection Starts.
20.2 Typical Emergency Situations.
PART II. GROUTING DESIGN AND CONTROL OF GROUTING.
Chapter 21. Understanding Geology.
21.1 Geologic Age
21.2 Types of Rock.
21.3 Geologic Structure.
21.4 The Rock Configuration/Geometry.
21.5 Stress State.
21.6 Derivation of Soil.
21.7 Classification of Soil.
Chapter 22. Investivations for Grouting.
22.1 Preliminary Considerations.
22.2 Soil Grouting.
22.3 Rock Grouting.
22.4 Grouting in Structures.
Chapter 23. Design of Grouting In Soil (Mike Byle).
23.1 Introduction.
23.2 Grout Functions in Soil.
23.3 Mass Improvement.
23.4 Modulus/Strength Improvement.
23.5 Permeability Reduction.
23.6 Structural Elements.
23.7 Karst Mitigation.
23.8 Design Summary.
Chapter 24. Design of Grouting in Rock.
24.1 The Existing Geology.
24.2 Strengthening Applications.
24.3 Seepage Control.
Chapter 25. Quality Control, Records, ad Verification.
25.1 Quality Control.
25.2 Injection Records.
25.3 Verification o Grouting Effectiveness.
Chapter 26. Numeric Analysis in Grouting (Mike Jefferies and Dawn Shuttle).
26.1 About Numerical Analysis.
26.2 Fractured Rock Grouting.
26.3 Compaction Grouting.
Chapter 27. Specifications and Contracts.
27.1 Specification Requirements.
27.2 Contracting Arrangements.
27.3 Full Scale Trials.
Chapter 28. The Games Contractors Play.
28.1 Marketing Efforts.
28.2 Proposal Trickery.
28.3 Once on the Job.
28.4 Defending Bad Work.
28.5 The Good Guys.
PART III. DRILLING AND GROUTING EQUIPMENT.
Chapter 29. Understanding Power Transmission.
29.1 Power Transmission Fundamentals.
29.2 Mechanical Systems.
29.3 Hydraulic Systems.
29.4 Pneumatic Systems.
Chapter 30. Drilling Equipment and Accessories.
30.1 Drill Rigs.
30.2 Drill Hole Casing.
30.3 Drill Rod.
30.4 Drill Bits.
30.5 Sleeve Port Pipes (Tube-A-Manchette).
30.6 Special Drive Needles.
30.7 Circulation (Mud) Pumps.
Chapter 31. Pump Mechanics.
31.1 Pumping Fundamentals.
31.2 Classification of Pumps.
31.3 Types of Pumps.
Chapter 32. Grout Pumps.
32.1 Power Source.
32.2 Types of Grout Pumps.
Chapter 33. Batchers, Mixers, and Agitators.
33.1 Small Mixers.
33.2 Mixing Equipment for Pourable Grouts.
33.3 Agitators.
33.4 Material Storage and Transfer Equipment.
33.5 Equipment for Low Mobility Grouts.
Chapter 34. Unitized Grout Plants.
34.1 Basic Considerations.
34.2 Plants for Pourable Cementitious Grouts.
34.3 Grout Plants for Low Movility Grouts.
34.4 Custom Built Grout Plants.
Chapter 35. Delivery Lines and Fittings.
35.1 Delivery Lines.
35.2 Valves.
Chapter 36. Gages, Gage Savers, and Flow Meters.
36.1 Pressure Gauges.
36.2 Gauge Savers.
36.3 Flow Meters.
36.4 Automated Monitoring Equipment.
Chapter 37. Packers.
37.1 Types of Packers.
37.2 Packer Deployment.
37.3 Double Packers.
Chapter 38. Some Concluding Thoughts.
Bibliography and References.
Index.
Contributors Biographies.
PART I. THE PRESSURE GROUTING PROCESS.
Chapter 1. Introduction.
1.1 History Of Grouting.
1.2 Why Grout?
Chapter 2. Types of Grouting.
2.1 Permeation Grouting.
2.2 Compaction Grouting.
2.3 Fracture/Claquage Grouting.
2.4 Mixing/Jet Grouting.
2.5 Fill Grouting.
2.6 Vacuum Grouting.
Chapter 3. The Wide World of Grout Materials.
3.1 Cementitious Materials.
3.2 Admixtures for Cementitious Grouts.
3.3 Non Cementitious Grouts.
3.4 Material Selection.
3.5 Basic Material Properties.
Chapter 4. Grout Rheology.
4.1 Grout Consistency.
4.2 Material Behavior.
4.3 Other Rheological Properties.
Chapter 5. Cementitious Grout Materials.
5.1 Portland Cement.
5.3 Special Cements.
5.4 Supplementary Cementing Materials.
5.5 Blended Hydraulic Cements.
5.6 Ultrafine Cement.
5.7 Admixtures for Cementitious Grouts.
5.8 Fillers.
5.9 Blocking Agents.
Chapter 6. Cementitious Grout Mixtures.
6.1 Bleed Water.
6.2 Water to Cement Ratio.
6.3 Mix Design.
Chapter 7. Non-Cementitious Grouts.
7.1 Chemical Solution Grouts.
7.2 Chemical Solution Grouts for Strengthening.
7.3 Chemical Solution Grouts for Water Control.
7.4 Resinous Grouts.
7.5 Miscellaneous Grout Materials.
Chapter 8. Tests for Evaluation of Grouts and Grouted Masses.
8.1 Flow Cones.
8.2 Specific Gravity.
8.3 Evaluation of Bleed.
8.4 Pressure Filtration.
8.5 Slump.
8.6 Strength Tests.
Chapter 9. Injection Fundamentals.
9.1 Principals of Flow.
9.2 Effects of Grout Rheology.
9.3 Grout Penetration.
9.4 Injection Pressure.
9.5 Pumping Rate.
9.6 Pressure Behavior.
9.7 Vacuum.
Chapter 10. Grout Holes
10.1 Establishing the Holes.
10.2 Hole Drilling.
10.3 Hole Closure and Abandonment.
Chapter 11. Grouting in Soil.
11.1 Compaction Grouting.
11.2 Permeation Grouting in Soil.
11.3 Fracture (Claquage) Grouting.
11.4 Jet Grouting (Mixing).
Chapter 12. Grouting in Rock.
12.1 Know The Rock Properties.
12.2 Grouting For Water Control.
12.3 Grouting Rock For Strengthening.
12.4 Grout Holes.
12.5 The Grout Mix.
12.6 Injection Considerations.
Chapter 13. Grouting in Concrete and Masonry Structures.
13.1 Filling Structural Cavities and Joints.
13.2 Filling Cracks and Joints.
13.3 Contact Grouting.
13.4 Post-Tension Tendon Grouting.
13.5 Grouting Bedplates.
13.6 Abandoning Conduits and Tanks.
13.7 Filling Annular Space/Backfilling.
13.8 Filling Fabric Forms.
13.9 Preplaced Aggregate Concrete.
13.10 An Unusual Structural Application.
Chapter 14. Groutjacking.
14.1 Slabjacking.
14.2 Groutjacking Structures.
Chapter 15. Grouting in Pipes and Conduits.
15.1 Access Restrictions.
15.2 Safety Issues.
15.3 Small Inaccessable Conduits.
15.4 Worker Accessible Conduits.
Chapter 16. Grouting of Underground Structures.
16.1 Geotechnical and Structural Grouting.
16.2 Excavation Methods.
16.3 Lining Systems.
16.4 Conclusions.
Chapter 17. Leakage Control in Structures.
17.1 The Leakage Path.
17.2 Grout Holes/Injection Ports.
17.3 The Grout Material.
17.4 Grout Injection and Monitoring.
17.5 Some Examples of Use.
Chapter 18. Grouting in Extreme Environments.
18.1 Temperature Effects on Grout.
18.2 Extreme Chemical Exposures.
18.3 Provisions for Temperature Extremes.
Chapter 19. The Use of Explosives in Grouting.
19.1 Introduction.
19.2 Principals of Explosives Use.
19.3 Formation of Expanded Head Piles and Ground Anchors.
19.4 Clearing Obstructions to Grout Flow.
19.5 Accessing Subsurfac Fissures and Voids.
19.6 In-Place Perforation Of Injection Casing.
Chapter 20. Emergency Response Grouting.
20.1 Before Injection Starts.
20.2 Typical Emergency Situations.
PART II. GROUTING DESIGN AND CONTROL OF GROUTING.
Chapter 21. Understanding Geology.
21.1 Geologic Age
21.2 Types of Rock.
21.3 Geologic Structure.
21.4 The Rock Configuration/Geometry.
21.5 Stress State.
21.6 Derivation of Soil.
21.7 Classification of Soil.
Chapter 22. Investivations for Grouting.
22.1 Preliminary Considerations.
22.2 Soil Grouting.
22.3 Rock Grouting.
22.4 Grouting in Structures.
Chapter 23. Design of Grouting In Soil (Mike Byle).
23.1 Introduction.
23.2 Grout Functions in Soil.
23.3 Mass Improvement.
23.4 Modulus/Strength Improvement.
23.5 Permeability Reduction.
23.6 Structural Elements.
23.7 Karst Mitigation.
23.8 Design Summary.
Chapter 24. Design of Grouting in Rock.
24.1 The Existing Geology.
24.2 Strengthening Applications.
24.3 Seepage Control.
Chapter 25. Quality Control, Records, ad Verification.
25.1 Quality Control.
25.2 Injection Records.
25.3 Verification o Grouting Effectiveness.
Chapter 26. Numeric Analysis in Grouting (Mike Jefferies and Dawn Shuttle).
26.1 About Numerical Analysis.
26.2 Fractured Rock Grouting.
26.3 Compaction Grouting.
Chapter 27. Specifications and Contracts.
27.1 Specification Requirements.
27.2 Contracting Arrangements.
27.3 Full Scale Trials.
Chapter 28. The Games Contractors Play.
28.1 Marketing Efforts.
28.2 Proposal Trickery.
28.3 Once on the Job.
28.4 Defending Bad Work.
28.5 The Good Guys.
PART III. DRILLING AND GROUTING EQUIPMENT.
Chapter 29. Understanding Power Transmission.
29.1 Power Transmission Fundamentals.
29.2 Mechanical Systems.
29.3 Hydraulic Systems.
29.4 Pneumatic Systems.
Chapter 30. Drilling Equipment and Accessories.
30.1 Drill Rigs.
30.2 Drill Hole Casing.
30.3 Drill Rod.
30.4 Drill Bits.
30.5 Sleeve Port Pipes (Tube-A-Manchette).
30.6 Special Drive Needles.
30.7 Circulation (Mud) Pumps.
Chapter 31. Pump Mechanics.
31.1 Pumping Fundamentals.
31.2 Classification of Pumps.
31.3 Types of Pumps.
Chapter 32. Grout Pumps.
32.1 Power Source.
32.2 Types of Grout Pumps.
Chapter 33. Batchers, Mixers, and Agitators.
33.1 Small Mixers.
33.2 Mixing Equipment for Pourable Grouts.
33.3 Agitators.
33.4 Material Storage and Transfer Equipment.
33.5 Equipment for Low Mobility Grouts.
Chapter 34. Unitized Grout Plants.
34.1 Basic Considerations.
34.2 Plants for Pourable Cementitious Grouts.
34.3 Grout Plants for Low Movility Grouts.
34.4 Custom Built Grout Plants.
Chapter 35. Delivery Lines and Fittings.
35.1 Delivery Lines.
35.2 Valves.
Chapter 36. Gages, Gage Savers, and Flow Meters.
36.1 Pressure Gauges.
36.2 Gauge Savers.
36.3 Flow Meters.
36.4 Automated Monitoring Equipment.
Chapter 37. Packers.
37.1 Types of Packers.
37.2 Packer Deployment.
37.3 Double Packers.
Chapter 38. Some Concluding Thoughts.
Bibliography and References.
Index.
Este título pertence ao(s) assunto(s) indicados(s). Para ver outros títulos clique no assunto desejado.
water movement, soil, rock, injection techniques, drilling, cementitious, noncementitious<br />
Preface. Acknowledgments.
Contributors Biographies.
PART I. THE PRESSURE GROUTING PROCESS.
Chapter 1. Introduction.
1.1 History Of Grouting.
1.2 Why Grout?
Chapter 2. Types of Grouting.
2.1 Permeation Grouting.
2.2 Compaction Grouting.
2.3 Fracture/Claquage Grouting.
2.4 Mixing/Jet Grouting.
2.5 Fill Grouting.
2.6 Vacuum Grouting.
Chapter 3. The Wide World of Grout Materials.
3.1 Cementitious Materials.
3.2 Admixtures for Cementitious Grouts.
3.3 Non Cementitious Grouts.
3.4 Material Selection.
3.5 Basic Material Properties.
Chapter 4. Grout Rheology.
4.1 Grout Consistency.
4.2 Material Behavior.
4.3 Other Rheological Properties.
Chapter 5. Cementitious Grout Materials.
5.1 Portland Cement.
5.3 Special Cements.
5.4 Supplementary Cementing Materials.
5.5 Blended Hydraulic Cements.
5.6 Ultrafine Cement.
5.7 Admixtures for Cementitious Grouts.
5.8 Fillers.
5.9 Blocking Agents.
Chapter 6. Cementitious Grout Mixtures.
6.1 Bleed Water.
6.2 Water to Cement Ratio.
6.3 Mix Design.
Chapter 7. Non-Cementitious Grouts.
7.1 Chemical Solution Grouts.
7.2 Chemical Solution Grouts for Strengthening.
7.3 Chemical Solution Grouts for Water Control.
7.4 Resinous Grouts.
7.5 Miscellaneous Grout Materials.
Chapter 8. Tests for Evaluation of Grouts and Grouted Masses.
8.1 Flow Cones.
8.2 Specific Gravity.
8.3 Evaluation of Bleed.
8.4 Pressure Filtration.
8.5 Slump.
8.6 Strength Tests.
Chapter 9. Injection Fundamentals.
9.1 Principals of Flow.
9.2 Effects of Grout Rheology.
9.3 Grout Penetration.
9.4 Injection Pressure.
9.5 Pumping Rate.
9.6 Pressure Behavior.
9.7 Vacuum.
Chapter 10. Grout Holes
10.1 Establishing the Holes.
10.2 Hole Drilling.
10.3 Hole Closure and Abandonment.
Chapter 11. Grouting in Soil.
11.1 Compaction Grouting.
11.2 Permeation Grouting in Soil.
11.3 Fracture (Claquage) Grouting.
11.4 Jet Grouting (Mixing).
Chapter 12. Grouting in Rock.
12.1 Know The Rock Properties.
12.2 Grouting For Water Control.
12.3 Grouting Rock For Strengthening.
12.4 Grout Holes.
12.5 The Grout Mix.
12.6 Injection Considerations.
Chapter 13. Grouting in Concrete and Masonry Structures.
13.1 Filling Structural Cavities and Joints.
13.2 Filling Cracks and Joints.
13.3 Contact Grouting.
13.4 Post-Tension Tendon Grouting.
13.5 Grouting Bedplates.
13.6 Abandoning Conduits and Tanks.
13.7 Filling Annular Space/Backfilling.
13.8 Filling Fabric Forms.
13.9 Preplaced Aggregate Concrete.
13.10 An Unusual Structural Application.
Chapter 14. Groutjacking.
14.1 Slabjacking.
14.2 Groutjacking Structures.
Chapter 15. Grouting in Pipes and Conduits.
15.1 Access Restrictions.
15.2 Safety Issues.
15.3 Small Inaccessable Conduits.
15.4 Worker Accessible Conduits.
Chapter 16. Grouting of Underground Structures.
16.1 Geotechnical and Structural Grouting.
16.2 Excavation Methods.
16.3 Lining Systems.
16.4 Conclusions.
Chapter 17. Leakage Control in Structures.
17.1 The Leakage Path.
17.2 Grout Holes/Injection Ports.
17.3 The Grout Material.
17.4 Grout Injection and Monitoring.
17.5 Some Examples of Use.
Chapter 18. Grouting in Extreme Environments.
18.1 Temperature Effects on Grout.
18.2 Extreme Chemical Exposures.
18.3 Provisions for Temperature Extremes.
Chapter 19. The Use of Explosives in Grouting.
19.1 Introduction.
19.2 Principals of Explosives Use.
19.3 Formation of Expanded Head Piles and Ground Anchors.
19.4 Clearing Obstructions to Grout Flow.
19.5 Accessing Subsurfac Fissures and Voids.
19.6 In-Place Perforation Of Injection Casing.
Chapter 20. Emergency Response Grouting.
20.1 Before Injection Starts.
20.2 Typical Emergency Situations.
PART II. GROUTING DESIGN AND CONTROL OF GROUTING.
Chapter 21. Understanding Geology.
21.1 Geologic Age
21.2 Types of Rock.
21.3 Geologic Structure.
21.4 The Rock Configuration/Geometry.
21.5 Stress State.
21.6 Derivation of Soil.
21.7 Classification of Soil.
Chapter 22. Investivations for Grouting.
22.1 Preliminary Considerations.
22.2 Soil Grouting.
22.3 Rock Grouting.
22.4 Grouting in Structures.
Chapter 23. Design of Grouting In Soil (Mike Byle).
23.1 Introduction.
23.2 Grout Functions in Soil.
23.3 Mass Improvement.
23.4 Modulus/Strength Improvement.
23.5 Permeability Reduction.
23.6 Structural Elements.
23.7 Karst Mitigation.
23.8 Design Summary.
Chapter 24. Design of Grouting in Rock.
24.1 The Existing Geology.
24.2 Strengthening Applications.
24.3 Seepage Control.
Chapter 25. Quality Control, Records, ad Verification.
25.1 Quality Control.
25.2 Injection Records.
25.3 Verification o Grouting Effectiveness.
Chapter 26. Numeric Analysis in Grouting (Mike Jefferies and Dawn Shuttle).
26.1 About Numerical Analysis.
26.2 Fractured Rock Grouting.
26.3 Compaction Grouting.
Chapter 27. Specifications and Contracts.
27.1 Specification Requirements.
27.2 Contracting Arrangements.
27.3 Full Scale Trials.
Chapter 28. The Games Contractors Play.
28.1 Marketing Efforts.
28.2 Proposal Trickery.
28.3 Once on the Job.
28.4 Defending Bad Work.
28.5 The Good Guys.
PART III. DRILLING AND GROUTING EQUIPMENT.
Chapter 29. Understanding Power Transmission.
29.1 Power Transmission Fundamentals.
29.2 Mechanical Systems.
29.3 Hydraulic Systems.
29.4 Pneumatic Systems.
Chapter 30. Drilling Equipment and Accessories.
30.1 Drill Rigs.
30.2 Drill Hole Casing.
30.3 Drill Rod.
30.4 Drill Bits.
30.5 Sleeve Port Pipes (Tube-A-Manchette).
30.6 Special Drive Needles.
30.7 Circulation (Mud) Pumps.
Chapter 31. Pump Mechanics.
31.1 Pumping Fundamentals.
31.2 Classification of Pumps.
31.3 Types of Pumps.
Chapter 32. Grout Pumps.
32.1 Power Source.
32.2 Types of Grout Pumps.
Chapter 33. Batchers, Mixers, and Agitators.
33.1 Small Mixers.
33.2 Mixing Equipment for Pourable Grouts.
33.3 Agitators.
33.4 Material Storage and Transfer Equipment.
33.5 Equipment for Low Mobility Grouts.
Chapter 34. Unitized Grout Plants.
34.1 Basic Considerations.
34.2 Plants for Pourable Cementitious Grouts.
34.3 Grout Plants for Low Movility Grouts.
34.4 Custom Built Grout Plants.
Chapter 35. Delivery Lines and Fittings.
35.1 Delivery Lines.
35.2 Valves.
Chapter 36. Gages, Gage Savers, and Flow Meters.
36.1 Pressure Gauges.
36.2 Gauge Savers.
36.3 Flow Meters.
36.4 Automated Monitoring Equipment.
Chapter 37. Packers.
37.1 Types of Packers.
37.2 Packer Deployment.
37.3 Double Packers.
Chapter 38. Some Concluding Thoughts.
Bibliography and References.
Index.
Contributors Biographies.
PART I. THE PRESSURE GROUTING PROCESS.
Chapter 1. Introduction.
1.1 History Of Grouting.
1.2 Why Grout?
Chapter 2. Types of Grouting.
2.1 Permeation Grouting.
2.2 Compaction Grouting.
2.3 Fracture/Claquage Grouting.
2.4 Mixing/Jet Grouting.
2.5 Fill Grouting.
2.6 Vacuum Grouting.
Chapter 3. The Wide World of Grout Materials.
3.1 Cementitious Materials.
3.2 Admixtures for Cementitious Grouts.
3.3 Non Cementitious Grouts.
3.4 Material Selection.
3.5 Basic Material Properties.
Chapter 4. Grout Rheology.
4.1 Grout Consistency.
4.2 Material Behavior.
4.3 Other Rheological Properties.
Chapter 5. Cementitious Grout Materials.
5.1 Portland Cement.
5.3 Special Cements.
5.4 Supplementary Cementing Materials.
5.5 Blended Hydraulic Cements.
5.6 Ultrafine Cement.
5.7 Admixtures for Cementitious Grouts.
5.8 Fillers.
5.9 Blocking Agents.
Chapter 6. Cementitious Grout Mixtures.
6.1 Bleed Water.
6.2 Water to Cement Ratio.
6.3 Mix Design.
Chapter 7. Non-Cementitious Grouts.
7.1 Chemical Solution Grouts.
7.2 Chemical Solution Grouts for Strengthening.
7.3 Chemical Solution Grouts for Water Control.
7.4 Resinous Grouts.
7.5 Miscellaneous Grout Materials.
Chapter 8. Tests for Evaluation of Grouts and Grouted Masses.
8.1 Flow Cones.
8.2 Specific Gravity.
8.3 Evaluation of Bleed.
8.4 Pressure Filtration.
8.5 Slump.
8.6 Strength Tests.
Chapter 9. Injection Fundamentals.
9.1 Principals of Flow.
9.2 Effects of Grout Rheology.
9.3 Grout Penetration.
9.4 Injection Pressure.
9.5 Pumping Rate.
9.6 Pressure Behavior.
9.7 Vacuum.
Chapter 10. Grout Holes
10.1 Establishing the Holes.
10.2 Hole Drilling.
10.3 Hole Closure and Abandonment.
Chapter 11. Grouting in Soil.
11.1 Compaction Grouting.
11.2 Permeation Grouting in Soil.
11.3 Fracture (Claquage) Grouting.
11.4 Jet Grouting (Mixing).
Chapter 12. Grouting in Rock.
12.1 Know The Rock Properties.
12.2 Grouting For Water Control.
12.3 Grouting Rock For Strengthening.
12.4 Grout Holes.
12.5 The Grout Mix.
12.6 Injection Considerations.
Chapter 13. Grouting in Concrete and Masonry Structures.
13.1 Filling Structural Cavities and Joints.
13.2 Filling Cracks and Joints.
13.3 Contact Grouting.
13.4 Post-Tension Tendon Grouting.
13.5 Grouting Bedplates.
13.6 Abandoning Conduits and Tanks.
13.7 Filling Annular Space/Backfilling.
13.8 Filling Fabric Forms.
13.9 Preplaced Aggregate Concrete.
13.10 An Unusual Structural Application.
Chapter 14. Groutjacking.
14.1 Slabjacking.
14.2 Groutjacking Structures.
Chapter 15. Grouting in Pipes and Conduits.
15.1 Access Restrictions.
15.2 Safety Issues.
15.3 Small Inaccessable Conduits.
15.4 Worker Accessible Conduits.
Chapter 16. Grouting of Underground Structures.
16.1 Geotechnical and Structural Grouting.
16.2 Excavation Methods.
16.3 Lining Systems.
16.4 Conclusions.
Chapter 17. Leakage Control in Structures.
17.1 The Leakage Path.
17.2 Grout Holes/Injection Ports.
17.3 The Grout Material.
17.4 Grout Injection and Monitoring.
17.5 Some Examples of Use.
Chapter 18. Grouting in Extreme Environments.
18.1 Temperature Effects on Grout.
18.2 Extreme Chemical Exposures.
18.3 Provisions for Temperature Extremes.
Chapter 19. The Use of Explosives in Grouting.
19.1 Introduction.
19.2 Principals of Explosives Use.
19.3 Formation of Expanded Head Piles and Ground Anchors.
19.4 Clearing Obstructions to Grout Flow.
19.5 Accessing Subsurfac Fissures and Voids.
19.6 In-Place Perforation Of Injection Casing.
Chapter 20. Emergency Response Grouting.
20.1 Before Injection Starts.
20.2 Typical Emergency Situations.
PART II. GROUTING DESIGN AND CONTROL OF GROUTING.
Chapter 21. Understanding Geology.
21.1 Geologic Age
21.2 Types of Rock.
21.3 Geologic Structure.
21.4 The Rock Configuration/Geometry.
21.5 Stress State.
21.6 Derivation of Soil.
21.7 Classification of Soil.
Chapter 22. Investivations for Grouting.
22.1 Preliminary Considerations.
22.2 Soil Grouting.
22.3 Rock Grouting.
22.4 Grouting in Structures.
Chapter 23. Design of Grouting In Soil (Mike Byle).
23.1 Introduction.
23.2 Grout Functions in Soil.
23.3 Mass Improvement.
23.4 Modulus/Strength Improvement.
23.5 Permeability Reduction.
23.6 Structural Elements.
23.7 Karst Mitigation.
23.8 Design Summary.
Chapter 24. Design of Grouting in Rock.
24.1 The Existing Geology.
24.2 Strengthening Applications.
24.3 Seepage Control.
Chapter 25. Quality Control, Records, ad Verification.
25.1 Quality Control.
25.2 Injection Records.
25.3 Verification o Grouting Effectiveness.
Chapter 26. Numeric Analysis in Grouting (Mike Jefferies and Dawn Shuttle).
26.1 About Numerical Analysis.
26.2 Fractured Rock Grouting.
26.3 Compaction Grouting.
Chapter 27. Specifications and Contracts.
27.1 Specification Requirements.
27.2 Contracting Arrangements.
27.3 Full Scale Trials.
Chapter 28. The Games Contractors Play.
28.1 Marketing Efforts.
28.2 Proposal Trickery.
28.3 Once on the Job.
28.4 Defending Bad Work.
28.5 The Good Guys.
PART III. DRILLING AND GROUTING EQUIPMENT.
Chapter 29. Understanding Power Transmission.
29.1 Power Transmission Fundamentals.
29.2 Mechanical Systems.
29.3 Hydraulic Systems.
29.4 Pneumatic Systems.
Chapter 30. Drilling Equipment and Accessories.
30.1 Drill Rigs.
30.2 Drill Hole Casing.
30.3 Drill Rod.
30.4 Drill Bits.
30.5 Sleeve Port Pipes (Tube-A-Manchette).
30.6 Special Drive Needles.
30.7 Circulation (Mud) Pumps.
Chapter 31. Pump Mechanics.
31.1 Pumping Fundamentals.
31.2 Classification of Pumps.
31.3 Types of Pumps.
Chapter 32. Grout Pumps.
32.1 Power Source.
32.2 Types of Grout Pumps.
Chapter 33. Batchers, Mixers, and Agitators.
33.1 Small Mixers.
33.2 Mixing Equipment for Pourable Grouts.
33.3 Agitators.
33.4 Material Storage and Transfer Equipment.
33.5 Equipment for Low Mobility Grouts.
Chapter 34. Unitized Grout Plants.
34.1 Basic Considerations.
34.2 Plants for Pourable Cementitious Grouts.
34.3 Grout Plants for Low Movility Grouts.
34.4 Custom Built Grout Plants.
Chapter 35. Delivery Lines and Fittings.
35.1 Delivery Lines.
35.2 Valves.
Chapter 36. Gages, Gage Savers, and Flow Meters.
36.1 Pressure Gauges.
36.2 Gauge Savers.
36.3 Flow Meters.
36.4 Automated Monitoring Equipment.
Chapter 37. Packers.
37.1 Types of Packers.
37.2 Packer Deployment.
37.3 Double Packers.
Chapter 38. Some Concluding Thoughts.
Bibliography and References.
Index.
Este título pertence ao(s) assunto(s) indicados(s). Para ver outros títulos clique no assunto desejado.
