Perovskite Materials for Energy and Environmental Applications
-15%
portes grátis
Perovskite Materials for Energy and Environmental Applications
Raza, Waseem; Ahmad, Khursheed
John Wiley & Sons Inc
08/2022
336
Dura
Inglês
9781119760276
15 a 20 dias
453
Descrição não disponível.
Preface xi
1 Computational Approach for Synthesis of Perovskite Solar Cells 1
A.S. Mathur and B.P. Singh
1.1 Introduction 2
1.2 Preliminary Steps 2
1.3 Advanced Semiconductor Analysis (ASA) 15
1.4 Analysis of Microelectronic and Photonic Structures (AMPS) 20
1.5 Automat for Simulation of Heterostructures (AFORS-HET) 23
1.6 Solar Cell Capacitance Simulator (SCAPS) 26
1.7 Conclusion 31
References 32
2 Fundamentals of Perovskite Solar Cells 37
Neha Patni, Rokadia Zulfiqar and Krishna Patel
2.1 Introduction 37
2.2 Structure 40
2.3 Working Mechanism of PSC 42
2.4 Device Architecture 43
2.4.1 Mesoporous Structure 43
2.4.2 Planar Heterostructures 45
2.5 Properties 46
2.5.1 High Optical Absorption 46
2.5.2 High Open-Circuit Voltage 47
2.5.3 Low Recombinations 48
2.5.4 Tunable Bandgap 49
2.5.4.1 Organic Cation (A) 49
2.5.4.2 Metal Cation (M) 50
2.5.4.3 Halide Anion (X) 51
2.5.5 Rapidly Increasing Efficiency 51
2.6 Drawbacks and Ongoing Challenges of PSCs 52
2.7 Conclusion 53
Acknowledgment 54
References 54
3 Surface Morphological Effects on the Performance of Perovskite Solar Cells 59
Srinivasa Rao Pathipati
3.1 Introduction 59
3.2 Morphology Control 60
3.2.1 The Effect of Device Architecture on the Morphology and the Device Performance 60
3.2.2 Effect of Deposition Technique on the Morphology of the Perovskite Layer 62
3.2.2.1 One-Step Deposition Method 62
3.2.2.2 Two-Step Deposition Technique 64
3.2.2.3 Dual-Source Precursor Approach 69
3.2.2.4 Vacuum Deposition Technique 70
3.3 Effect of Various Parameters on Growth of Perovskite 71
3.3.1 Effect of Solvent Additive 71
3.3.2 Effect of Solid Additive 72
3.3.3 Seed-Induced Growth of Perovskites 73
3.3.4 Homogenous Cap-Induced Crystallization 75
3.3.5 Effect of Hydrophobicity 77
3.3.6 Effect of Interface Modification 81
3.3.7 Effect of Solvent Annealing 82
References 84
4 Advanced Synthesis Strategies for Single Crystal Perovskite Halides 91
Prerna and Sandeep Arya
4.1 Introduction 91
4.2 Popular Single Crystal Growth Techniques 92
4.2.1 Anti-Solvent Vapor-Assisted Crystallization (AVC) Method 99
4.2.2 Inverse Temperature Crystallization (ITC) 101
4.2.3 Modified Inverse Temperature Crystallization 104
4.2.4 Solution Temperature Lowering Method 106
4.2.4.1 Top-Seeded Solution Growth Method 107
4.2.4.2 Bottom-Seeded Solution Growth Method 108
4.2.5 Bridgman (BG) Method 110
4.3 Other Techniques 113
Conclusions 117
References 118
5 Synchrotron-Based Techniques for Analysis of Perovskite Solar Cells 123
Umar Farooq, Ruby Phul, Mohd Shabbir, Rizwan Arif and Akrema
5.1 Introduction 124
5.2 Synchrotron Techniques, Their Limitations and Advantages 128
5.3 Synchrotron Radiation X-Ray Diffraction/Scattering (SR-XRD) 128
5.4 In Situ XRD 131
5.5 Small-Angle X-Ray Scattering 133
5.6 Wide-Angle X-Ray Scattering 135
5.7 Synchrotron Radiation-Based X-Ray Absorption Techniques 135
5.8 X-Ray Absorption Near Edge Structure 137
5.9 Extended X-Ray Absorption Fine Structure 139
5.10 Conclusions 140
References 142
6 Recent Progress on Perovskite-Based Solar Cells 147
Waseem Raza and Khursheed Ahmad
6.1 Introduction 148
6.2 Device Structure and Working Principle of PSCs 152
6.3 Perovskite-Based Solar Cells 153
6.4 Conclusion 161
References 161
7 BiFeO3-Based Materials For Augmented Photoactivity 167
Rashmi Acharya, Lopamudra Acharya and Kulamani Parida
7.1 Introduction 168
7.1.1 Photocatalytic Water Splitting 171
7.1.2 Photocatalytic Conversion of CO2 171
7.1.3 Photocatalytic Fixation of Nitrogen 172
7.1.4 Selective Organic Transformation for the Synthesis of Fine Chemicals 172
7.1.5 Photodegradation of Pollutants 173
7.2 Structure, Physicochemical, and Photocatalytic Activity of BiFeO3 175
7.3 Elemental Doping in BFO 177
7.3.1 PXRD Studies 177
7.3.2 Morphological Studies 178
7.3.3 XPS Studies 179
7.3.4 Optical Property Studies 180
7.3.5 Effect of Doping on Photocatalytic Activity of BFO 182
7.4 BFO Semiconductor Heterojunction Construction 183
7.4.1 Heterojunction Construction With Wide Band Gap Semiconductors 184
7.4.2 Heterojunction Construction With Narrow Band Gap Semiconductors 193
7.5 Separation Ability and Reproducibility 198
7.6 Conclusion and Perspectives 199
7.7 Acknowledgement 200
References 201
8 Photocatalytic Degradation of Pollutants Using ZnTiO3-Based Semiconductor 217
Waseem Raza and Khursheed Ahmad
8.1 Introduction 218
8.2 Synthesis of ZnTiO3 222
8.3 Fundamental Need and Basic Mechanism for Photocatalytic Degradation of Pollutants 223
8.4 Photocatalytic Degaradation of Pollutants Based on ZnTiO3 225
8.5 Conclusion 234
References 235
9 Types of Perovskite Materials 241
Faria Khatoon Naqvi, Yashfeen Khan, Saba Beg and Anees Ahmad
Abbreviations 241
9.1 Introduction 242
9.1.2 Types of Perovskite 243
9.1.2.1 ABO3 Type of Perovskite Materials 244
9.1.2.2 Oxygen and Cation-Deficient Perovskites 246
9.1.2.3 Complex Perovskites 247
9.1.2.4 Layered Perovskites 248
References 253
10 Effects of Various Additives to CH3NH3PbI3 Perovskite Solar Cells 257
Takeo Oku
10.1 Introduction 257
10.2 Crystal Structures of Perovskite Halides 258
10.3 Basic Configuration of Solar Cells 260
10.4 Cl Doping to Perovskites 266
10.5 Sb or As Doping to Perovskites 270
10.6 Highly (100)-Oriented Perovskites 274
10.7 Cu Doping to Perovskites 279
10.8 K/FA Doping to Perovskites 283
10.9 Morphology Control by Polysilane 290
10.10 High-Temperature Annealed Perovskites 295
10.11 Conclusion 305
Acknowledgements 305
References 305
Index 317
1 Computational Approach for Synthesis of Perovskite Solar Cells 1
A.S. Mathur and B.P. Singh
1.1 Introduction 2
1.2 Preliminary Steps 2
1.3 Advanced Semiconductor Analysis (ASA) 15
1.4 Analysis of Microelectronic and Photonic Structures (AMPS) 20
1.5 Automat for Simulation of Heterostructures (AFORS-HET) 23
1.6 Solar Cell Capacitance Simulator (SCAPS) 26
1.7 Conclusion 31
References 32
2 Fundamentals of Perovskite Solar Cells 37
Neha Patni, Rokadia Zulfiqar and Krishna Patel
2.1 Introduction 37
2.2 Structure 40
2.3 Working Mechanism of PSC 42
2.4 Device Architecture 43
2.4.1 Mesoporous Structure 43
2.4.2 Planar Heterostructures 45
2.5 Properties 46
2.5.1 High Optical Absorption 46
2.5.2 High Open-Circuit Voltage 47
2.5.3 Low Recombinations 48
2.5.4 Tunable Bandgap 49
2.5.4.1 Organic Cation (A) 49
2.5.4.2 Metal Cation (M) 50
2.5.4.3 Halide Anion (X) 51
2.5.5 Rapidly Increasing Efficiency 51
2.6 Drawbacks and Ongoing Challenges of PSCs 52
2.7 Conclusion 53
Acknowledgment 54
References 54
3 Surface Morphological Effects on the Performance of Perovskite Solar Cells 59
Srinivasa Rao Pathipati
3.1 Introduction 59
3.2 Morphology Control 60
3.2.1 The Effect of Device Architecture on the Morphology and the Device Performance 60
3.2.2 Effect of Deposition Technique on the Morphology of the Perovskite Layer 62
3.2.2.1 One-Step Deposition Method 62
3.2.2.2 Two-Step Deposition Technique 64
3.2.2.3 Dual-Source Precursor Approach 69
3.2.2.4 Vacuum Deposition Technique 70
3.3 Effect of Various Parameters on Growth of Perovskite 71
3.3.1 Effect of Solvent Additive 71
3.3.2 Effect of Solid Additive 72
3.3.3 Seed-Induced Growth of Perovskites 73
3.3.4 Homogenous Cap-Induced Crystallization 75
3.3.5 Effect of Hydrophobicity 77
3.3.6 Effect of Interface Modification 81
3.3.7 Effect of Solvent Annealing 82
References 84
4 Advanced Synthesis Strategies for Single Crystal Perovskite Halides 91
Prerna and Sandeep Arya
4.1 Introduction 91
4.2 Popular Single Crystal Growth Techniques 92
4.2.1 Anti-Solvent Vapor-Assisted Crystallization (AVC) Method 99
4.2.2 Inverse Temperature Crystallization (ITC) 101
4.2.3 Modified Inverse Temperature Crystallization 104
4.2.4 Solution Temperature Lowering Method 106
4.2.4.1 Top-Seeded Solution Growth Method 107
4.2.4.2 Bottom-Seeded Solution Growth Method 108
4.2.5 Bridgman (BG) Method 110
4.3 Other Techniques 113
Conclusions 117
References 118
5 Synchrotron-Based Techniques for Analysis of Perovskite Solar Cells 123
Umar Farooq, Ruby Phul, Mohd Shabbir, Rizwan Arif and Akrema
5.1 Introduction 124
5.2 Synchrotron Techniques, Their Limitations and Advantages 128
5.3 Synchrotron Radiation X-Ray Diffraction/Scattering (SR-XRD) 128
5.4 In Situ XRD 131
5.5 Small-Angle X-Ray Scattering 133
5.6 Wide-Angle X-Ray Scattering 135
5.7 Synchrotron Radiation-Based X-Ray Absorption Techniques 135
5.8 X-Ray Absorption Near Edge Structure 137
5.9 Extended X-Ray Absorption Fine Structure 139
5.10 Conclusions 140
References 142
6 Recent Progress on Perovskite-Based Solar Cells 147
Waseem Raza and Khursheed Ahmad
6.1 Introduction 148
6.2 Device Structure and Working Principle of PSCs 152
6.3 Perovskite-Based Solar Cells 153
6.4 Conclusion 161
References 161
7 BiFeO3-Based Materials For Augmented Photoactivity 167
Rashmi Acharya, Lopamudra Acharya and Kulamani Parida
7.1 Introduction 168
7.1.1 Photocatalytic Water Splitting 171
7.1.2 Photocatalytic Conversion of CO2 171
7.1.3 Photocatalytic Fixation of Nitrogen 172
7.1.4 Selective Organic Transformation for the Synthesis of Fine Chemicals 172
7.1.5 Photodegradation of Pollutants 173
7.2 Structure, Physicochemical, and Photocatalytic Activity of BiFeO3 175
7.3 Elemental Doping in BFO 177
7.3.1 PXRD Studies 177
7.3.2 Morphological Studies 178
7.3.3 XPS Studies 179
7.3.4 Optical Property Studies 180
7.3.5 Effect of Doping on Photocatalytic Activity of BFO 182
7.4 BFO Semiconductor Heterojunction Construction 183
7.4.1 Heterojunction Construction With Wide Band Gap Semiconductors 184
7.4.2 Heterojunction Construction With Narrow Band Gap Semiconductors 193
7.5 Separation Ability and Reproducibility 198
7.6 Conclusion and Perspectives 199
7.7 Acknowledgement 200
References 201
8 Photocatalytic Degradation of Pollutants Using ZnTiO3-Based Semiconductor 217
Waseem Raza and Khursheed Ahmad
8.1 Introduction 218
8.2 Synthesis of ZnTiO3 222
8.3 Fundamental Need and Basic Mechanism for Photocatalytic Degradation of Pollutants 223
8.4 Photocatalytic Degaradation of Pollutants Based on ZnTiO3 225
8.5 Conclusion 234
References 235
9 Types of Perovskite Materials 241
Faria Khatoon Naqvi, Yashfeen Khan, Saba Beg and Anees Ahmad
Abbreviations 241
9.1 Introduction 242
9.1.2 Types of Perovskite 243
9.1.2.1 ABO3 Type of Perovskite Materials 244
9.1.2.2 Oxygen and Cation-Deficient Perovskites 246
9.1.2.3 Complex Perovskites 247
9.1.2.4 Layered Perovskites 248
References 253
10 Effects of Various Additives to CH3NH3PbI3 Perovskite Solar Cells 257
Takeo Oku
10.1 Introduction 257
10.2 Crystal Structures of Perovskite Halides 258
10.3 Basic Configuration of Solar Cells 260
10.4 Cl Doping to Perovskites 266
10.5 Sb or As Doping to Perovskites 270
10.6 Highly (100)-Oriented Perovskites 274
10.7 Cu Doping to Perovskites 279
10.8 K/FA Doping to Perovskites 283
10.9 Morphology Control by Polysilane 290
10.10 High-Temperature Annealed Perovskites 295
10.11 Conclusion 305
Acknowledgements 305
References 305
Index 317
Este título pertence ao(s) assunto(s) indicados(s). Para ver outros títulos clique no assunto desejado.
Perovskite solar cells; modeling; simulation; photovoltaic parameters; open-circuit voltage; power conversion efficiency; morphology; solvent engineering; crystallization; grain growth; solvent annealing; seed mediated growth; cap-induced crystallization; perovskite halides; synthesis strategies; single-crystal; synchrotron radiation; x-rays; optoelectronics; operando measurement; photovoltaic; efficiency; band gap; absorption spectrum; hole transport layer; electron transport layer; bfo; elemental doping; heterojunction; visible light responsive; photoactivity; photocatalysis; zntio3; perovskite; heterogeneous; environmental protection
Preface xi
1 Computational Approach for Synthesis of Perovskite Solar Cells 1
A.S. Mathur and B.P. Singh
1.1 Introduction 2
1.2 Preliminary Steps 2
1.3 Advanced Semiconductor Analysis (ASA) 15
1.4 Analysis of Microelectronic and Photonic Structures (AMPS) 20
1.5 Automat for Simulation of Heterostructures (AFORS-HET) 23
1.6 Solar Cell Capacitance Simulator (SCAPS) 26
1.7 Conclusion 31
References 32
2 Fundamentals of Perovskite Solar Cells 37
Neha Patni, Rokadia Zulfiqar and Krishna Patel
2.1 Introduction 37
2.2 Structure 40
2.3 Working Mechanism of PSC 42
2.4 Device Architecture 43
2.4.1 Mesoporous Structure 43
2.4.2 Planar Heterostructures 45
2.5 Properties 46
2.5.1 High Optical Absorption 46
2.5.2 High Open-Circuit Voltage 47
2.5.3 Low Recombinations 48
2.5.4 Tunable Bandgap 49
2.5.4.1 Organic Cation (A) 49
2.5.4.2 Metal Cation (M) 50
2.5.4.3 Halide Anion (X) 51
2.5.5 Rapidly Increasing Efficiency 51
2.6 Drawbacks and Ongoing Challenges of PSCs 52
2.7 Conclusion 53
Acknowledgment 54
References 54
3 Surface Morphological Effects on the Performance of Perovskite Solar Cells 59
Srinivasa Rao Pathipati
3.1 Introduction 59
3.2 Morphology Control 60
3.2.1 The Effect of Device Architecture on the Morphology and the Device Performance 60
3.2.2 Effect of Deposition Technique on the Morphology of the Perovskite Layer 62
3.2.2.1 One-Step Deposition Method 62
3.2.2.2 Two-Step Deposition Technique 64
3.2.2.3 Dual-Source Precursor Approach 69
3.2.2.4 Vacuum Deposition Technique 70
3.3 Effect of Various Parameters on Growth of Perovskite 71
3.3.1 Effect of Solvent Additive 71
3.3.2 Effect of Solid Additive 72
3.3.3 Seed-Induced Growth of Perovskites 73
3.3.4 Homogenous Cap-Induced Crystallization 75
3.3.5 Effect of Hydrophobicity 77
3.3.6 Effect of Interface Modification 81
3.3.7 Effect of Solvent Annealing 82
References 84
4 Advanced Synthesis Strategies for Single Crystal Perovskite Halides 91
Prerna and Sandeep Arya
4.1 Introduction 91
4.2 Popular Single Crystal Growth Techniques 92
4.2.1 Anti-Solvent Vapor-Assisted Crystallization (AVC) Method 99
4.2.2 Inverse Temperature Crystallization (ITC) 101
4.2.3 Modified Inverse Temperature Crystallization 104
4.2.4 Solution Temperature Lowering Method 106
4.2.4.1 Top-Seeded Solution Growth Method 107
4.2.4.2 Bottom-Seeded Solution Growth Method 108
4.2.5 Bridgman (BG) Method 110
4.3 Other Techniques 113
Conclusions 117
References 118
5 Synchrotron-Based Techniques for Analysis of Perovskite Solar Cells 123
Umar Farooq, Ruby Phul, Mohd Shabbir, Rizwan Arif and Akrema
5.1 Introduction 124
5.2 Synchrotron Techniques, Their Limitations and Advantages 128
5.3 Synchrotron Radiation X-Ray Diffraction/Scattering (SR-XRD) 128
5.4 In Situ XRD 131
5.5 Small-Angle X-Ray Scattering 133
5.6 Wide-Angle X-Ray Scattering 135
5.7 Synchrotron Radiation-Based X-Ray Absorption Techniques 135
5.8 X-Ray Absorption Near Edge Structure 137
5.9 Extended X-Ray Absorption Fine Structure 139
5.10 Conclusions 140
References 142
6 Recent Progress on Perovskite-Based Solar Cells 147
Waseem Raza and Khursheed Ahmad
6.1 Introduction 148
6.2 Device Structure and Working Principle of PSCs 152
6.3 Perovskite-Based Solar Cells 153
6.4 Conclusion 161
References 161
7 BiFeO3-Based Materials For Augmented Photoactivity 167
Rashmi Acharya, Lopamudra Acharya and Kulamani Parida
7.1 Introduction 168
7.1.1 Photocatalytic Water Splitting 171
7.1.2 Photocatalytic Conversion of CO2 171
7.1.3 Photocatalytic Fixation of Nitrogen 172
7.1.4 Selective Organic Transformation for the Synthesis of Fine Chemicals 172
7.1.5 Photodegradation of Pollutants 173
7.2 Structure, Physicochemical, and Photocatalytic Activity of BiFeO3 175
7.3 Elemental Doping in BFO 177
7.3.1 PXRD Studies 177
7.3.2 Morphological Studies 178
7.3.3 XPS Studies 179
7.3.4 Optical Property Studies 180
7.3.5 Effect of Doping on Photocatalytic Activity of BFO 182
7.4 BFO Semiconductor Heterojunction Construction 183
7.4.1 Heterojunction Construction With Wide Band Gap Semiconductors 184
7.4.2 Heterojunction Construction With Narrow Band Gap Semiconductors 193
7.5 Separation Ability and Reproducibility 198
7.6 Conclusion and Perspectives 199
7.7 Acknowledgement 200
References 201
8 Photocatalytic Degradation of Pollutants Using ZnTiO3-Based Semiconductor 217
Waseem Raza and Khursheed Ahmad
8.1 Introduction 218
8.2 Synthesis of ZnTiO3 222
8.3 Fundamental Need and Basic Mechanism for Photocatalytic Degradation of Pollutants 223
8.4 Photocatalytic Degaradation of Pollutants Based on ZnTiO3 225
8.5 Conclusion 234
References 235
9 Types of Perovskite Materials 241
Faria Khatoon Naqvi, Yashfeen Khan, Saba Beg and Anees Ahmad
Abbreviations 241
9.1 Introduction 242
9.1.2 Types of Perovskite 243
9.1.2.1 ABO3 Type of Perovskite Materials 244
9.1.2.2 Oxygen and Cation-Deficient Perovskites 246
9.1.2.3 Complex Perovskites 247
9.1.2.4 Layered Perovskites 248
References 253
10 Effects of Various Additives to CH3NH3PbI3 Perovskite Solar Cells 257
Takeo Oku
10.1 Introduction 257
10.2 Crystal Structures of Perovskite Halides 258
10.3 Basic Configuration of Solar Cells 260
10.4 Cl Doping to Perovskites 266
10.5 Sb or As Doping to Perovskites 270
10.6 Highly (100)-Oriented Perovskites 274
10.7 Cu Doping to Perovskites 279
10.8 K/FA Doping to Perovskites 283
10.9 Morphology Control by Polysilane 290
10.10 High-Temperature Annealed Perovskites 295
10.11 Conclusion 305
Acknowledgements 305
References 305
Index 317
1 Computational Approach for Synthesis of Perovskite Solar Cells 1
A.S. Mathur and B.P. Singh
1.1 Introduction 2
1.2 Preliminary Steps 2
1.3 Advanced Semiconductor Analysis (ASA) 15
1.4 Analysis of Microelectronic and Photonic Structures (AMPS) 20
1.5 Automat for Simulation of Heterostructures (AFORS-HET) 23
1.6 Solar Cell Capacitance Simulator (SCAPS) 26
1.7 Conclusion 31
References 32
2 Fundamentals of Perovskite Solar Cells 37
Neha Patni, Rokadia Zulfiqar and Krishna Patel
2.1 Introduction 37
2.2 Structure 40
2.3 Working Mechanism of PSC 42
2.4 Device Architecture 43
2.4.1 Mesoporous Structure 43
2.4.2 Planar Heterostructures 45
2.5 Properties 46
2.5.1 High Optical Absorption 46
2.5.2 High Open-Circuit Voltage 47
2.5.3 Low Recombinations 48
2.5.4 Tunable Bandgap 49
2.5.4.1 Organic Cation (A) 49
2.5.4.2 Metal Cation (M) 50
2.5.4.3 Halide Anion (X) 51
2.5.5 Rapidly Increasing Efficiency 51
2.6 Drawbacks and Ongoing Challenges of PSCs 52
2.7 Conclusion 53
Acknowledgment 54
References 54
3 Surface Morphological Effects on the Performance of Perovskite Solar Cells 59
Srinivasa Rao Pathipati
3.1 Introduction 59
3.2 Morphology Control 60
3.2.1 The Effect of Device Architecture on the Morphology and the Device Performance 60
3.2.2 Effect of Deposition Technique on the Morphology of the Perovskite Layer 62
3.2.2.1 One-Step Deposition Method 62
3.2.2.2 Two-Step Deposition Technique 64
3.2.2.3 Dual-Source Precursor Approach 69
3.2.2.4 Vacuum Deposition Technique 70
3.3 Effect of Various Parameters on Growth of Perovskite 71
3.3.1 Effect of Solvent Additive 71
3.3.2 Effect of Solid Additive 72
3.3.3 Seed-Induced Growth of Perovskites 73
3.3.4 Homogenous Cap-Induced Crystallization 75
3.3.5 Effect of Hydrophobicity 77
3.3.6 Effect of Interface Modification 81
3.3.7 Effect of Solvent Annealing 82
References 84
4 Advanced Synthesis Strategies for Single Crystal Perovskite Halides 91
Prerna and Sandeep Arya
4.1 Introduction 91
4.2 Popular Single Crystal Growth Techniques 92
4.2.1 Anti-Solvent Vapor-Assisted Crystallization (AVC) Method 99
4.2.2 Inverse Temperature Crystallization (ITC) 101
4.2.3 Modified Inverse Temperature Crystallization 104
4.2.4 Solution Temperature Lowering Method 106
4.2.4.1 Top-Seeded Solution Growth Method 107
4.2.4.2 Bottom-Seeded Solution Growth Method 108
4.2.5 Bridgman (BG) Method 110
4.3 Other Techniques 113
Conclusions 117
References 118
5 Synchrotron-Based Techniques for Analysis of Perovskite Solar Cells 123
Umar Farooq, Ruby Phul, Mohd Shabbir, Rizwan Arif and Akrema
5.1 Introduction 124
5.2 Synchrotron Techniques, Their Limitations and Advantages 128
5.3 Synchrotron Radiation X-Ray Diffraction/Scattering (SR-XRD) 128
5.4 In Situ XRD 131
5.5 Small-Angle X-Ray Scattering 133
5.6 Wide-Angle X-Ray Scattering 135
5.7 Synchrotron Radiation-Based X-Ray Absorption Techniques 135
5.8 X-Ray Absorption Near Edge Structure 137
5.9 Extended X-Ray Absorption Fine Structure 139
5.10 Conclusions 140
References 142
6 Recent Progress on Perovskite-Based Solar Cells 147
Waseem Raza and Khursheed Ahmad
6.1 Introduction 148
6.2 Device Structure and Working Principle of PSCs 152
6.3 Perovskite-Based Solar Cells 153
6.4 Conclusion 161
References 161
7 BiFeO3-Based Materials For Augmented Photoactivity 167
Rashmi Acharya, Lopamudra Acharya and Kulamani Parida
7.1 Introduction 168
7.1.1 Photocatalytic Water Splitting 171
7.1.2 Photocatalytic Conversion of CO2 171
7.1.3 Photocatalytic Fixation of Nitrogen 172
7.1.4 Selective Organic Transformation for the Synthesis of Fine Chemicals 172
7.1.5 Photodegradation of Pollutants 173
7.2 Structure, Physicochemical, and Photocatalytic Activity of BiFeO3 175
7.3 Elemental Doping in BFO 177
7.3.1 PXRD Studies 177
7.3.2 Morphological Studies 178
7.3.3 XPS Studies 179
7.3.4 Optical Property Studies 180
7.3.5 Effect of Doping on Photocatalytic Activity of BFO 182
7.4 BFO Semiconductor Heterojunction Construction 183
7.4.1 Heterojunction Construction With Wide Band Gap Semiconductors 184
7.4.2 Heterojunction Construction With Narrow Band Gap Semiconductors 193
7.5 Separation Ability and Reproducibility 198
7.6 Conclusion and Perspectives 199
7.7 Acknowledgement 200
References 201
8 Photocatalytic Degradation of Pollutants Using ZnTiO3-Based Semiconductor 217
Waseem Raza and Khursheed Ahmad
8.1 Introduction 218
8.2 Synthesis of ZnTiO3 222
8.3 Fundamental Need and Basic Mechanism for Photocatalytic Degradation of Pollutants 223
8.4 Photocatalytic Degaradation of Pollutants Based on ZnTiO3 225
8.5 Conclusion 234
References 235
9 Types of Perovskite Materials 241
Faria Khatoon Naqvi, Yashfeen Khan, Saba Beg and Anees Ahmad
Abbreviations 241
9.1 Introduction 242
9.1.2 Types of Perovskite 243
9.1.2.1 ABO3 Type of Perovskite Materials 244
9.1.2.2 Oxygen and Cation-Deficient Perovskites 246
9.1.2.3 Complex Perovskites 247
9.1.2.4 Layered Perovskites 248
References 253
10 Effects of Various Additives to CH3NH3PbI3 Perovskite Solar Cells 257
Takeo Oku
10.1 Introduction 257
10.2 Crystal Structures of Perovskite Halides 258
10.3 Basic Configuration of Solar Cells 260
10.4 Cl Doping to Perovskites 266
10.5 Sb or As Doping to Perovskites 270
10.6 Highly (100)-Oriented Perovskites 274
10.7 Cu Doping to Perovskites 279
10.8 K/FA Doping to Perovskites 283
10.9 Morphology Control by Polysilane 290
10.10 High-Temperature Annealed Perovskites 295
10.11 Conclusion 305
Acknowledgements 305
References 305
Index 317
Este título pertence ao(s) assunto(s) indicados(s). Para ver outros títulos clique no assunto desejado.
Perovskite solar cells; modeling; simulation; photovoltaic parameters; open-circuit voltage; power conversion efficiency; morphology; solvent engineering; crystallization; grain growth; solvent annealing; seed mediated growth; cap-induced crystallization; perovskite halides; synthesis strategies; single-crystal; synchrotron radiation; x-rays; optoelectronics; operando measurement; photovoltaic; efficiency; band gap; absorption spectrum; hole transport layer; electron transport layer; bfo; elemental doping; heterojunction; visible light responsive; photoactivity; photocatalysis; zntio3; perovskite; heterogeneous; environmental protection
