Forensic Systems Engineering
-15%
portes grátis
Forensic Systems Engineering
Evaluating Operations by Discovery
John Wiley and Sons Ltd
03/2018
368
Dura
Inglês
9781119422754
15 a 20 dias
Descrição não disponível.
Preface xix 1 What Is Forensic Systems Engineering? 1 1.1 Systems and Systems Engineering 1 1.2 Forensic Systems Engineering 2 References 4 2 Contracts, Specifications, and Standards 7 2.1 General 7 2.2 The Contract 9 2.2.1 Considerations 9 2.2.2 Contract Review 10 2.3 Specifications 12 2.4 Standards 14 Credits 16 References 16 3 Management Systems 17 3.1 Management Standards 18 3.1.1 Operations and Good Business Practices 18 3.1.2 Attributes of Management Standards 18 3.2 Effective Management Systems 19 3.2.1 Malcolm Baldrige 19 3.2.2 Total Quality Management 20 3.2.3 Six Sigma 20 3.2.4 Lean 21 3.2.5 Production Part Approval Process 22 3.3 Performance and Performance 23 3.4 Addendum 23 Credits 24 References 24 4 Performance Management: ISO 9001 25 4.1 Background of ISO 9000 26 4.1.1 ISO 9001 in the United States 27 4.1.2 Structure of ISO 9000: 2005 27 4.1.3 The Process Approach 28 4.2 Form and Substance 32 4.2.1 Reference Performance Standards 33 4.2.2 Forensics and the Paper Trail 34 Credits 35 References 35 5 The Materiality of Operations 37 5.1 Rationale for Financial Metrics 38 5.1.1 Sarbanes-Oxley 38 5.1.1.1 Title III: Corporate Responsibility 38 5.1.1.2 Title IV: Enhanced Financial Disclosures 39 5.1.2 Internal Control 39 5.1.3 The Materiality of Quality 41 5.2 Mapping Operations to Finance 41 5.2.1 The Liability of Quality 43 5.2.2 The Forensic View 44 Credits 44 References 44 6 Process Liability 47 6.1 Theory of Process Liability 48 6.1.1 Operations and Process Liability 50 6.1.2 Process Liability and Misfeasance 51 6.2 Process Liability and the Law 52 Credits 52 References 52 7 Forensic Analysis of Process Liability 55 7.1 Improper Manufacturing Operations 57 7.1.1 Verification and Validation 57 7.1.1.1 Nonstandard Design Procedures 57 7.1.1.2 Unverified or Unvalidated Design 58 7.1.1.3 Tests Waived by Management 58 7.1.1.4 Altered Test Procedures and Results 58 7.1.2 Resource Management 59 7.1.2.1 Unmonitored Outsourcing 59 7.1.2.2 Substandard Purchased Parts 60 7.1.2.3 Ghost Inventory 60 7.1.2.4 Ineffective Flow Down 61 7.1.3 Process Management 61 7.1.3.1 Forced Production 61 7.1.3.2 Abuse and Threats by Management 62 7.2 Management Responsibility 62 7.2.1 Effective Internal Controls 62 7.2.2 Business Standards of Care 63 7.2.3 Liability Risk Management 64 7.2.4 Employee Empowerment 65 7.2.5 Effective Management Review 65 7.2.6 Closed ]Loop Processes 66 References 67 8 Legal Trends to Process Liability 71 8.1 An Idea Whose Time Has Come 71 8.2 Some Court Actions Thus Far 72 8.2.1 QMS Certified Organizations 73 8.2.2 QMS Noncertified Organizations 74 References 75 9 Process Stability and Capability 77 9.1 Process Stability 77 9.1.1 Stability and Stationarity 78 9.1.2 Stability Conditions 79 9.1.3 Stable Processes 80 9.1.4 Measuring Process Stability 82 9.2 Process Capability 83 9.2.1 Measuring Capability 83 9.2.2 A Limit of Process Capability 85 9.3 The Rare Event 85 9.3.1 Instability and the Rare Event 85 9.3.2 Identifying the Rare Event 86 9.4 Attribute Testing 87 References 88 10 Forensic Issues in Product Reliability 91 10.1 Background in Product Reliability 91 10.2 Legal Issues in the Design of Reliability 94 10.2.1 Good Design Practices 95 10.2.2 Design Is Intrinsic to Manufacturing and Service 95 10.2.3 Intended Use 95 10.2.4 Paper Trail of Evidence 96 10.2.5 Reliability Is an Implied Design Requirement 97 10.3 Legal Issues in Measuring Reliability 97 10.3.1 Failure Modes 97 10.3.2 Estimation of MTTF 98 10.3.3 The More Failure Data the Better 99 10.3.4 The Paper Trail of Reliability Measurement 99 10.4 Legal Issues in Testing for Reliability 100 10.4.1 Defined and Documented Life Test Procedures 100 10.4.2 Life Test Records and Reports 101 10.4.3 Test Procedures 101 10.5 When Product Reliability Is not in the Contract 102 10.5.1 Product Liability 102 10.5.2 ISO 9001 and FAR 103 10.6 Warranty and Reliability 104 References 105 11 Forensic View of Internal Control 107 11.1 Internal Controls 108 11.1.1 Purpose of Control 108 11.1.2 Control Defined 109 11.1.3 Control Elements in Operations 109 11.2 Control Stability 110 11.2.1 Model of a Continuous System 111 11.2.2 Transfer Functions 112 11.3 Implementing Controls 115 11.4 Control of Operations 117 11.4.1 Proportional (Gain) Control 118 11.4.2 Controlling the Effect of Change 119 11.4.2.1 Integral Control 120 11.4.2.2 Derivative (Rate) Control 121 11.4.3 Responsibility, Authority, and Accountability 121 References 123 12 Case Study: Madelena Airframes Corporation 125 12.1 Background of the Case 126 12.2 Problem Description 127 12.2.1 MAC Policies and Procedures (Missile Production) 127 12.2.2 Missile Test 127 12.3 Examining the Evidence 128 12.3.1 Evidence: The Players 129 12.3.2 Evidence: E ]mails 129 12.4 Depositions 132 12.4.1 Deposition of the General Manager 132 12.4.2 Deposition of the Senior Test Engineer 132 12.4.3 Deposition of the Production Manager 132 12.4.4 Deposition of the Chief Design Engineer 133 12.4.5 Deposition of the Test Programs Manager 133 12.5 Problem Analysis 133 12.5.1 Review of the Evidence 133 12.5.2 Nonconformities 134 12.5.2.1 Clause 7.3.1(b) Design and Development Planning 134 12.5.2.2 Clause 7.3.5 Design and Development Verification 135 12.5.2.3 Clause 7.3.6 Design and Development Validation 135 12.5.2.4 Clause 8.1 General Test Requirements 135 12.5.2.5 Clause 8.2.4 Monitoring and Measurement of Product 135 12.5.2.6 Clause 4.1 General QMS Requirements 135 12.5.2.7 Clause 5.6.1 General Management Review Requirements 135 12.6 Arriving at the Truth 136 12.7 Damages 137 12.7.1 Synthesis of Damages 137 12.7.2 Costs of Correction 137 References 138 13 Examining Serially Dependent Processes 139 13.1 Serial Dependence: Causal Correlation 140 13.2 Properties of Serial Dependence 142 13.2.1 Work Station Definition 142 13.2.2 Assumptions 142 13.2.2.1 Assumption 1 143 13.2.2.2 Assumption 2 143 13.2.2.3 Assumption 3 143 13.2.3 Development of the Conditional Distribution 144 13.2.4 Process Stability 145 13.3 Serial Dependence: Noncausal Correlation 147 13.4 Forensic Systems Analysis 147 Credits 148 References 148 14 Measuring Operations 149 14.1 ISO 9000 as Internal Controls 151 14.2 QMS Characteristics 152 14.3 The QMS Forensic Model 154 14.3.1 Estimating Control Risk 155 14.3.2 Cost of Liability 156 14.4 The Forensic Lab and Operations 157 14.5 Conclusions 158 Credits 159 References 159 15 Stability Analysis of Dysfunctional Processes 161 15.1 Special Terms 162 15.1.1 Dysfunction 162 15.1.2 Common and Special Causes 163 15.1.3 Disturbances and Interventions 163 15.1.4 Cause and Effect 163 15.2 Literature Review 165 15.3 Question Before the Law 168 15.4 Process Stability 169 15.4.1 Internal Control 170 15.4.2 Mathematical Model for Correlation 170 15.5 Conclusions 173 Credits 174 References 174 16 Verification and Validation 179 16.1 Cause and Effect 180 16.1.1 An Historical View 180 16.1.2 Productivity versus Quality 182 16.2 What Is in a Name? 185 16.2.1 Verification and Validation Defined 186 16.2.2 Inspection and Test 187 16.2.3 Monitor and Measure 188 16.2.4 Subtle Transitions 189 16.3 The Forensic View of Measurement 190 16.3.1 Machine Tools and Tooling 190 16.3.2 Measurement 191 16.3.3 Control Charting 192 16.3.4 First Pass Yield 192 16.3.5 First Article Inspection 193 16.3.6 Tool Try 194 References 194 17 Forensic Sampling of Internal Controls 197 17.1 Populations 198 17.1.1 Sample Population 199 17.1.2 Homogeneity 199 17.1.3 Population Size 200 17.1.4 One Hundred Percent Inspection 201 17.2 Sampling Plan 201 17.2.1 Objectives 201 17.2.2 Statistical and Nonstatistical Sampling 202 17.2.3 Fixed Size and Stop ]or ]Go 203 17.2.4 Sample Selection and Size 204 17.3 Attribute Sampling 204 17.3.1 Internal Control Sampling 204 17.3.2 Deviation Rates 206 17.3.2.1 Acceptable Deviation Rate 206 17.3.2.2 System Deviation Rate 207 17.3.3 Sampling Risks 207 17.3.3.1 Control Risk 207 17.3.3.2 Alpha and Beta Risks 208 17.3.4 Confidence Level 208 17.3.5 Evaluation 209 17.4 Forensic System Caveats 209 References 210 18 Forensic Analysis of Supplier Control 211 18.1 Outsourcing 213 18.2 Supply Chain Management 215 18.3 Forensic Analysis of Supply Systems 216 18.3.1 Basic Principles of Supplier Control 216 18.3.2 The Forensic Challenge 216 18.3.2.1 Ensure that Purchased Units Conform to Contracted Specifications 217 18.3.2.2 Assessment of the Supplier Process 218 18.3.2.3 Tracking 218 18.3.2.4 Customer Relations 219 18.3.2.5 Verification and Storage of Supplies 221 18.3.2.6 Identification and Traceability 222 18.4 Supplier Verification: A Case Study 223 18.4.1 Manufacture 224 18.4.2 V50 Testing 224 18.4.3 V50 Test Results 226 18.5 Malfeasant Supply Systems 226 References 227 19 Discovering System Nonconformity 229 19.1 Identifying Nonconformities 231 19.1.1 Reporting Nonconformities 232 19.1.2 Disputes 233 19.2 The Elements of Assessment 234 19.2.1 Measures of Performance 234 19.2.2 Considerations in Forensic Analysis of Systems 235 19.3 Forming Decisions 236 19.4 Describing Nonconformities 238 19.5 A Forensic View of Documented Information 240 19.5.1 Requirements in Documented Information 241 19.5.2 The Quality Manual 241 19.5.3 Documented Information Control 243 19.5.4 Records 244 Acknowledgment 246 References 246 Appendix A The Engineering Design Process: A Descriptive View 247 A.1 Design and Development 248 A.1.1 The Design Process 248 A.1.2 Customer Requirements 249 A.1.3 Interactive Design 249 A.1.4 Intermediate Testing 249 A.1.5 Final Iteration 251 A.2 Forensic Analysis of the Design Process 252 References 253 Appendix B Introduction to Product Reliability 255 B.1 Reliability Characteristics 256 B.1.1 Reliability Metrics 256 B.1.2 Visual Life Cycle 257 B.2 Weibull Analysis 259 B.2.1 Distributions 259 B.2.2 Shape and Scale 260 B.2.2.1 Shape 260 B.2.2.2 Scale 262 B.2.3 The B ]Percentile 262 B.3 Design for Reliability 263 B.4 Measuring Reliability 265 B.4.1 On Reliability Metrics 265 B.4.2 Graphing Failure Data 266 B.5 Testing for Reliability 269 References 271 Appendix C Brief Review of Probability and Statistics 273 C.1 Measures of Location 274 C.1.1 Average: The Mean Value 274 C.1.2 Average: The Median 275 C.1.3 Average: The Mode 275 C.2 Measures of Dispersion 276 C.2.1 Variance 276 C.2.2 Range 276 C.3 Distributions 277 C.3.1 Continuous Distributions 277 C.3.2 Discrete Distributions 279 C.4 Tests of Hypotheses 281 C.4.1 Estimating Parametric Change 281 C.4.2 Confidence Level 284 C.5 Ordered Statistics 284 References 285 Appendix D Sampling of Internal Control Systems 287 D.1 Populations 288 D.1.1 Sample Populations 289 D.1.2 Population Size 290 D.1.3 Homogeneity 290 D.2 Attribute Sampling 291 D.2.1 Acceptable Deviation Rate 292 D.2.2 System Deviation Rate 293 D.2.3 Controls 293 D.3 Sampling Risks 294 D.3.1 Control Risk 294 D.3.2 Consumer and Producer Risks 294 D.3.3 Alpha and Beta Errors 295 D.4 Sampling Analysis 297 D.4.1 Statistical Inference 297 D.4.2 Sample Distributions 298 D.4.3 Sample Size 299 D.4.4 Estimating the SDR 299 D.4.5 Confidence Interval 300 References 302 Appendix E Statistical Sampling Plans 305 E.1 Fixed ]Size Attribute Sampling Plan 306 E.1.1 Determine the Objectives 306 E.1.2 Define Attribute and Deviation Conditions 306 E.1.2.1 Acceptable Deviation Rate 306 E.1.2.2 System Deviation Rate 307 E.1.3 Define the Population 307 E.1.4 Determine the Method of Sample Selection 307 E.1.5 Determine the Sample Size 308 E.1.6 Perform the Sampling Plan 312 E.1.7 Evaluate Sample Results 312 E.2 Stop ]or ]Go Sampling 313 E.2.1 Acceptable Deviation Rate 313 E.2.2 Sample Size 314 E.2.3 Evaluation 316 E.3 One Hundred Percent Inspection 316 E.4 Application: An Attribute Sampling Plan 317 References 318 Appendix F Nonstatistical Sampling Plans 321 F.1 Sampling Format 322 F.1.1 Frame of the Sampling Plan 322 F.1.2 Attribute and Deviation Conditions 323 F.1.3 The Population 323 F.1.4 Nonstatistical Sample Selection 324 F.1.5 Sample Size 325 F.1.6 The Effect of Sample Size on Beta Error 326 F.1.7 Evaluating Sample Results 327 F.2 Nonstatistical Estimations 327 References 328 Index
Este título pertence ao(s) assunto(s) indicados(s). Para ver outros títulos clique no assunto desejado.
Preface xix 1 What Is Forensic Systems Engineering? 1 1.1 Systems and Systems Engineering 1 1.2 Forensic Systems Engineering 2 References 4 2 Contracts, Specifications, and Standards 7 2.1 General 7 2.2 The Contract 9 2.2.1 Considerations 9 2.2.2 Contract Review 10 2.3 Specifications 12 2.4 Standards 14 Credits 16 References 16 3 Management Systems 17 3.1 Management Standards 18 3.1.1 Operations and Good Business Practices 18 3.1.2 Attributes of Management Standards 18 3.2 Effective Management Systems 19 3.2.1 Malcolm Baldrige 19 3.2.2 Total Quality Management 20 3.2.3 Six Sigma 20 3.2.4 Lean 21 3.2.5 Production Part Approval Process 22 3.3 Performance and Performance 23 3.4 Addendum 23 Credits 24 References 24 4 Performance Management: ISO 9001 25 4.1 Background of ISO 9000 26 4.1.1 ISO 9001 in the United States 27 4.1.2 Structure of ISO 9000: 2005 27 4.1.3 The Process Approach 28 4.2 Form and Substance 32 4.2.1 Reference Performance Standards 33 4.2.2 Forensics and the Paper Trail 34 Credits 35 References 35 5 The Materiality of Operations 37 5.1 Rationale for Financial Metrics 38 5.1.1 Sarbanes-Oxley 38 5.1.1.1 Title III: Corporate Responsibility 38 5.1.1.2 Title IV: Enhanced Financial Disclosures 39 5.1.2 Internal Control 39 5.1.3 The Materiality of Quality 41 5.2 Mapping Operations to Finance 41 5.2.1 The Liability of Quality 43 5.2.2 The Forensic View 44 Credits 44 References 44 6 Process Liability 47 6.1 Theory of Process Liability 48 6.1.1 Operations and Process Liability 50 6.1.2 Process Liability and Misfeasance 51 6.2 Process Liability and the Law 52 Credits 52 References 52 7 Forensic Analysis of Process Liability 55 7.1 Improper Manufacturing Operations 57 7.1.1 Verification and Validation 57 7.1.1.1 Nonstandard Design Procedures 57 7.1.1.2 Unverified or Unvalidated Design 58 7.1.1.3 Tests Waived by Management 58 7.1.1.4 Altered Test Procedures and Results 58 7.1.2 Resource Management 59 7.1.2.1 Unmonitored Outsourcing 59 7.1.2.2 Substandard Purchased Parts 60 7.1.2.3 Ghost Inventory 60 7.1.2.4 Ineffective Flow Down 61 7.1.3 Process Management 61 7.1.3.1 Forced Production 61 7.1.3.2 Abuse and Threats by Management 62 7.2 Management Responsibility 62 7.2.1 Effective Internal Controls 62 7.2.2 Business Standards of Care 63 7.2.3 Liability Risk Management 64 7.2.4 Employee Empowerment 65 7.2.5 Effective Management Review 65 7.2.6 Closed ]Loop Processes 66 References 67 8 Legal Trends to Process Liability 71 8.1 An Idea Whose Time Has Come 71 8.2 Some Court Actions Thus Far 72 8.2.1 QMS Certified Organizations 73 8.2.2 QMS Noncertified Organizations 74 References 75 9 Process Stability and Capability 77 9.1 Process Stability 77 9.1.1 Stability and Stationarity 78 9.1.2 Stability Conditions 79 9.1.3 Stable Processes 80 9.1.4 Measuring Process Stability 82 9.2 Process Capability 83 9.2.1 Measuring Capability 83 9.2.2 A Limit of Process Capability 85 9.3 The Rare Event 85 9.3.1 Instability and the Rare Event 85 9.3.2 Identifying the Rare Event 86 9.4 Attribute Testing 87 References 88 10 Forensic Issues in Product Reliability 91 10.1 Background in Product Reliability 91 10.2 Legal Issues in the Design of Reliability 94 10.2.1 Good Design Practices 95 10.2.2 Design Is Intrinsic to Manufacturing and Service 95 10.2.3 Intended Use 95 10.2.4 Paper Trail of Evidence 96 10.2.5 Reliability Is an Implied Design Requirement 97 10.3 Legal Issues in Measuring Reliability 97 10.3.1 Failure Modes 97 10.3.2 Estimation of MTTF 98 10.3.3 The More Failure Data the Better 99 10.3.4 The Paper Trail of Reliability Measurement 99 10.4 Legal Issues in Testing for Reliability 100 10.4.1 Defined and Documented Life Test Procedures 100 10.4.2 Life Test Records and Reports 101 10.4.3 Test Procedures 101 10.5 When Product Reliability Is not in the Contract 102 10.5.1 Product Liability 102 10.5.2 ISO 9001 and FAR 103 10.6 Warranty and Reliability 104 References 105 11 Forensic View of Internal Control 107 11.1 Internal Controls 108 11.1.1 Purpose of Control 108 11.1.2 Control Defined 109 11.1.3 Control Elements in Operations 109 11.2 Control Stability 110 11.2.1 Model of a Continuous System 111 11.2.2 Transfer Functions 112 11.3 Implementing Controls 115 11.4 Control of Operations 117 11.4.1 Proportional (Gain) Control 118 11.4.2 Controlling the Effect of Change 119 11.4.2.1 Integral Control 120 11.4.2.2 Derivative (Rate) Control 121 11.4.3 Responsibility, Authority, and Accountability 121 References 123 12 Case Study: Madelena Airframes Corporation 125 12.1 Background of the Case 126 12.2 Problem Description 127 12.2.1 MAC Policies and Procedures (Missile Production) 127 12.2.2 Missile Test 127 12.3 Examining the Evidence 128 12.3.1 Evidence: The Players 129 12.3.2 Evidence: E ]mails 129 12.4 Depositions 132 12.4.1 Deposition of the General Manager 132 12.4.2 Deposition of the Senior Test Engineer 132 12.4.3 Deposition of the Production Manager 132 12.4.4 Deposition of the Chief Design Engineer 133 12.4.5 Deposition of the Test Programs Manager 133 12.5 Problem Analysis 133 12.5.1 Review of the Evidence 133 12.5.2 Nonconformities 134 12.5.2.1 Clause 7.3.1(b) Design and Development Planning 134 12.5.2.2 Clause 7.3.5 Design and Development Verification 135 12.5.2.3 Clause 7.3.6 Design and Development Validation 135 12.5.2.4 Clause 8.1 General Test Requirements 135 12.5.2.5 Clause 8.2.4 Monitoring and Measurement of Product 135 12.5.2.6 Clause 4.1 General QMS Requirements 135 12.5.2.7 Clause 5.6.1 General Management Review Requirements 135 12.6 Arriving at the Truth 136 12.7 Damages 137 12.7.1 Synthesis of Damages 137 12.7.2 Costs of Correction 137 References 138 13 Examining Serially Dependent Processes 139 13.1 Serial Dependence: Causal Correlation 140 13.2 Properties of Serial Dependence 142 13.2.1 Work Station Definition 142 13.2.2 Assumptions 142 13.2.2.1 Assumption 1 143 13.2.2.2 Assumption 2 143 13.2.2.3 Assumption 3 143 13.2.3 Development of the Conditional Distribution 144 13.2.4 Process Stability 145 13.3 Serial Dependence: Noncausal Correlation 147 13.4 Forensic Systems Analysis 147 Credits 148 References 148 14 Measuring Operations 149 14.1 ISO 9000 as Internal Controls 151 14.2 QMS Characteristics 152 14.3 The QMS Forensic Model 154 14.3.1 Estimating Control Risk 155 14.3.2 Cost of Liability 156 14.4 The Forensic Lab and Operations 157 14.5 Conclusions 158 Credits 159 References 159 15 Stability Analysis of Dysfunctional Processes 161 15.1 Special Terms 162 15.1.1 Dysfunction 162 15.1.2 Common and Special Causes 163 15.1.3 Disturbances and Interventions 163 15.1.4 Cause and Effect 163 15.2 Literature Review 165 15.3 Question Before the Law 168 15.4 Process Stability 169 15.4.1 Internal Control 170 15.4.2 Mathematical Model for Correlation 170 15.5 Conclusions 173 Credits 174 References 174 16 Verification and Validation 179 16.1 Cause and Effect 180 16.1.1 An Historical View 180 16.1.2 Productivity versus Quality 182 16.2 What Is in a Name? 185 16.2.1 Verification and Validation Defined 186 16.2.2 Inspection and Test 187 16.2.3 Monitor and Measure 188 16.2.4 Subtle Transitions 189 16.3 The Forensic View of Measurement 190 16.3.1 Machine Tools and Tooling 190 16.3.2 Measurement 191 16.3.3 Control Charting 192 16.3.4 First Pass Yield 192 16.3.5 First Article Inspection 193 16.3.6 Tool Try 194 References 194 17 Forensic Sampling of Internal Controls 197 17.1 Populations 198 17.1.1 Sample Population 199 17.1.2 Homogeneity 199 17.1.3 Population Size 200 17.1.4 One Hundred Percent Inspection 201 17.2 Sampling Plan 201 17.2.1 Objectives 201 17.2.2 Statistical and Nonstatistical Sampling 202 17.2.3 Fixed Size and Stop ]or ]Go 203 17.2.4 Sample Selection and Size 204 17.3 Attribute Sampling 204 17.3.1 Internal Control Sampling 204 17.3.2 Deviation Rates 206 17.3.2.1 Acceptable Deviation Rate 206 17.3.2.2 System Deviation Rate 207 17.3.3 Sampling Risks 207 17.3.3.1 Control Risk 207 17.3.3.2 Alpha and Beta Risks 208 17.3.4 Confidence Level 208 17.3.5 Evaluation 209 17.4 Forensic System Caveats 209 References 210 18 Forensic Analysis of Supplier Control 211 18.1 Outsourcing 213 18.2 Supply Chain Management 215 18.3 Forensic Analysis of Supply Systems 216 18.3.1 Basic Principles of Supplier Control 216 18.3.2 The Forensic Challenge 216 18.3.2.1 Ensure that Purchased Units Conform to Contracted Specifications 217 18.3.2.2 Assessment of the Supplier Process 218 18.3.2.3 Tracking 218 18.3.2.4 Customer Relations 219 18.3.2.5 Verification and Storage of Supplies 221 18.3.2.6 Identification and Traceability 222 18.4 Supplier Verification: A Case Study 223 18.4.1 Manufacture 224 18.4.2 V50 Testing 224 18.4.3 V50 Test Results 226 18.5 Malfeasant Supply Systems 226 References 227 19 Discovering System Nonconformity 229 19.1 Identifying Nonconformities 231 19.1.1 Reporting Nonconformities 232 19.1.2 Disputes 233 19.2 The Elements of Assessment 234 19.2.1 Measures of Performance 234 19.2.2 Considerations in Forensic Analysis of Systems 235 19.3 Forming Decisions 236 19.4 Describing Nonconformities 238 19.5 A Forensic View of Documented Information 240 19.5.1 Requirements in Documented Information 241 19.5.2 The Quality Manual 241 19.5.3 Documented Information Control 243 19.5.4 Records 244 Acknowledgment 246 References 246 Appendix A The Engineering Design Process: A Descriptive View 247 A.1 Design and Development 248 A.1.1 The Design Process 248 A.1.2 Customer Requirements 249 A.1.3 Interactive Design 249 A.1.4 Intermediate Testing 249 A.1.5 Final Iteration 251 A.2 Forensic Analysis of the Design Process 252 References 253 Appendix B Introduction to Product Reliability 255 B.1 Reliability Characteristics 256 B.1.1 Reliability Metrics 256 B.1.2 Visual Life Cycle 257 B.2 Weibull Analysis 259 B.2.1 Distributions 259 B.2.2 Shape and Scale 260 B.2.2.1 Shape 260 B.2.2.2 Scale 262 B.2.3 The B ]Percentile 262 B.3 Design for Reliability 263 B.4 Measuring Reliability 265 B.4.1 On Reliability Metrics 265 B.4.2 Graphing Failure Data 266 B.5 Testing for Reliability 269 References 271 Appendix C Brief Review of Probability and Statistics 273 C.1 Measures of Location 274 C.1.1 Average: The Mean Value 274 C.1.2 Average: The Median 275 C.1.3 Average: The Mode 275 C.2 Measures of Dispersion 276 C.2.1 Variance 276 C.2.2 Range 276 C.3 Distributions 277 C.3.1 Continuous Distributions 277 C.3.2 Discrete Distributions 279 C.4 Tests of Hypotheses 281 C.4.1 Estimating Parametric Change 281 C.4.2 Confidence Level 284 C.5 Ordered Statistics 284 References 285 Appendix D Sampling of Internal Control Systems 287 D.1 Populations 288 D.1.1 Sample Populations 289 D.1.2 Population Size 290 D.1.3 Homogeneity 290 D.2 Attribute Sampling 291 D.2.1 Acceptable Deviation Rate 292 D.2.2 System Deviation Rate 293 D.2.3 Controls 293 D.3 Sampling Risks 294 D.3.1 Control Risk 294 D.3.2 Consumer and Producer Risks 294 D.3.3 Alpha and Beta Errors 295 D.4 Sampling Analysis 297 D.4.1 Statistical Inference 297 D.4.2 Sample Distributions 298 D.4.3 Sample Size 299 D.4.4 Estimating the SDR 299 D.4.5 Confidence Interval 300 References 302 Appendix E Statistical Sampling Plans 305 E.1 Fixed ]Size Attribute Sampling Plan 306 E.1.1 Determine the Objectives 306 E.1.2 Define Attribute and Deviation Conditions 306 E.1.2.1 Acceptable Deviation Rate 306 E.1.2.2 System Deviation Rate 307 E.1.3 Define the Population 307 E.1.4 Determine the Method of Sample Selection 307 E.1.5 Determine the Sample Size 308 E.1.6 Perform the Sampling Plan 312 E.1.7 Evaluate Sample Results 312 E.2 Stop ]or ]Go Sampling 313 E.2.1 Acceptable Deviation Rate 313 E.2.2 Sample Size 314 E.2.3 Evaluation 316 E.3 One Hundred Percent Inspection 316 E.4 Application: An Attribute Sampling Plan 317 References 318 Appendix F Nonstatistical Sampling Plans 321 F.1 Sampling Format 322 F.1.1 Frame of the Sampling Plan 322 F.1.2 Attribute and Deviation Conditions 323 F.1.3 The Population 323 F.1.4 Nonstatistical Sample Selection 324 F.1.5 Sample Size 325 F.1.6 The Effect of Sample Size on Beta Error 326 F.1.7 Evaluating Sample Results 327 F.2 Nonstatistical Estimations 327 References 328 Index
Este título pertence ao(s) assunto(s) indicados(s). Para ver outros títulos clique no assunto desejado.
